Blue Jeans Cable

{"id":6673398202521,"title":"10 Foot Black BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC","handle":"10-foot-black-bjc-high-flex-3g-6g-hd-sdi-patch-cable-belden-1505f-bnc-to-bnc","description":"\u003ch4\u003e10 Foot Black BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC\u003c\/h4\u003e\n\u003cp id=\"b\"\u003e10 foot Black High-Flex BNC to BNC 3G\/6G HD SDI Patch Cable, Blue Jeans Cable\nbrand This 3G\/6G HD-SDI cable is built with a special high-flexibility\nprecision video coax which has been sweep-tested to 4.5 GHz and broadcast-\nquality 75 ohm crimp-type BNCs. It has a compacted stranded copper center\nconductor and two 95% coverage braided bare copper shields laid one on top of\nthe other, a foamed HDPE dielectric, and soft pliable PVC jacket. These\nmaterials make for an unusually flexible precision video cable assembly,\nsuited for patch bays and for mobile installations or any situation where high\nflexibility and\/or flex life is required. The cable stock is made in the USA\nto exacting standards; every spool is sweep-tested to 4.5 GHz to ensure that\ndimensional control and impedance stability are within tight tolerances, and\nthat return loss is kept to a minimum. The BNCs, likewise, are true broadcast-\nquality products designed to minimize return loss through the plug body and\nplug\/jack interface. The cable is rated CM, making it lawful for installation\nin walls and cable trays--anywhere but in a riser or plenum. Blue Jeans Cable:\nProfessional Precision Cable Assembly Our cables are assembled in our Seattle\nworkshop by American workers, using the highest quality precision stripping\nand crimping equipment. Coax is stripped with precise dimensional control in\nour Swiss-made Schleuniger coaxial cable strippers, resulting in a shield\nbraid undamaged by stripping and a center conductor of consistent maximum\nlength for full engagement in the BNC pin crimp. Our crimping is done on\nSchleuniger 3-ton pneumatic presses--not on hand tools that can loosen and\nresult in a weak crimp. The result is a cable which is not only superb in its\nelectrical performance, but is physically robust and stable and will endure\nfrequent handling and flexing.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003cli\u003eHigh-flex cable stock designed specifically for HD SDI patchcord applications; high flexibility coupled with tight impedance stability\u003c\/li\u003e\n \u003cli\u003eBroadcast-quality BNC crimp-style connectors on both ends\u003c\/li\u003e\n \u003cli\u003eAvailable in multiple jacket colors for ease of cable identification; search our listings for more\u003c\/li\u003e\n \u003cli\u003eRated CM for installation in walls\u003c\/li\u003e\n \u003cli\u003eBulk cable manufactured, and final assembly, in USA.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-08T01:40:37+10:00","created_at":"2021-04-08T01:40:37+10:00","vendor":"Blue Jeans Cable","type":"HDMI Cables","tags":["m20"],"price":16700,"price_min":16700,"price_max":16700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39728643965081,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00IITT7H2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"10 Foot Black BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC","public_title":null,"options":["Default Title"],"price":16700,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":"811887013676","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/soundstores.net\/cdn\/shop\/products\/B00IITT7H2.jpg?v=1650563797"],"featured_image":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITT7H2.jpg?v=1650563797","options":["Title"],"media":[{"alt":null,"id":26773899542681,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITT7H2.jpg?v=1650563797"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITT7H2.jpg?v=1650563797","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e10 Foot Black BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC\u003c\/h4\u003e\n\u003cp id=\"b\"\u003e10 foot Black High-Flex BNC to BNC 3G\/6G HD SDI Patch Cable, Blue Jeans Cable\nbrand This 3G\/6G HD-SDI cable is built with a special high-flexibility\nprecision video coax which has been sweep-tested to 4.5 GHz and broadcast-\nquality 75 ohm crimp-type BNCs. It has a compacted stranded copper center\nconductor and two 95% coverage braided bare copper shields laid one on top of\nthe other, a foamed HDPE dielectric, and soft pliable PVC jacket. These\nmaterials make for an unusually flexible precision video cable assembly,\nsuited for patch bays and for mobile installations or any situation where high\nflexibility and\/or flex life is required. The cable stock is made in the USA\nto exacting standards; every spool is sweep-tested to 4.5 GHz to ensure that\ndimensional control and impedance stability are within tight tolerances, and\nthat return loss is kept to a minimum. The BNCs, likewise, are true broadcast-\nquality products designed to minimize return loss through the plug body and\nplug\/jack interface. The cable is rated CM, making it lawful for installation\nin walls and cable trays--anywhere but in a riser or plenum. Blue Jeans Cable:\nProfessional Precision Cable Assembly Our cables are assembled in our Seattle\nworkshop by American workers, using the highest quality precision stripping\nand crimping equipment. Coax is stripped with precise dimensional control in\nour Swiss-made Schleuniger coaxial cable strippers, resulting in a shield\nbraid undamaged by stripping and a center conductor of consistent maximum\nlength for full engagement in the BNC pin crimp. Our crimping is done on\nSchleuniger 3-ton pneumatic presses--not on hand tools that can loosen and\nresult in a weak crimp. The result is a cable which is not only superb in its\nelectrical performance, but is physically robust and stable and will endure\nfrequent handling and flexing.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003cli\u003eHigh-flex cable stock designed specifically for HD SDI patchcord applications; high flexibility coupled with tight impedance stability\u003c\/li\u003e\n \u003cli\u003eBroadcast-quality BNC crimp-style connectors on both ends\u003c\/li\u003e\n \u003cli\u003eAvailable in multiple jacket colors for ease of cable identification; search our listings for more\u003c\/li\u003e\n \u003cli\u003eRated CM for installation in walls\u003c\/li\u003e\n \u003cli\u003eBulk cable manufactured, and final assembly, in USA.\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6673711202457,"title":"10 Foot Green BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC","handle":"10-foot-green-bjc-high-flex-3g-6g-hd-sdi-patch-cable-belden-1505f-bnc-to-bnc","description":"\u003ch4\u003e10 Foot Green BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC\u003c\/h4\u003e\n\u003cp id=\"b\"\u003e10 foot Green High-Flex BNC to BNC 3G\/6G HD SDI Patch Cable, Blue Jeans Cable\nbrand This 3G\/6G HD-SDI cable is built with a special high-flexibility\nprecision video coax which has been sweep-tested to 4.5 GHz and broadcast-\nquality 75 ohm crimp-type BNCs. It has a compacted stranded copper center\nconductor and two 95% coverage braided bare copper shields laid one on top of\nthe other, a foamed HDPE dielectric, and soft pliable PVC jacket. These\nmaterials make for an unusually flexible precision video cable assembly,\nsuited for patch bays and for mobile installations or any situation where high\nflexibility and\/or flex life is required. The cable stock is made in the USA\nto exacting standards; every spool is sweep-tested to 4.5 GHz to ensure that\ndimensional control and impedance stability are within tight tolerances, and\nthat return loss is kept to a minimum. The BNCs, likewise, are true broadcast-\nquality products designed to minimize return loss through the plug body and\nplug\/jack interface. The cable is rated CM, making it lawful for installation\nin walls and cable trays--anywhere but in a riser or plenum. Blue Jeans Cable:\nProfessional Precision Cable Assembly Our cables are assembled in our Seattle\nworkshop by American workers, using the highest quality precision stripping\nand crimping equipment. Coax is stripped with precise dimensional control in\nour Swiss-made Schleuniger coaxial cable strippers, resulting in a shield\nbraid undamaged by stripping and a center conductor of consistent maximum\nlength for full engagement in the BNC pin crimp. Our crimping is done on\nSchleuniger 3-ton pneumatic presses--not on hand tools that can loosen and\nresult in a weak crimp. The result is a cable which is not only superb in its\nelectrical performance, but is physically robust and stable and will endure\nfrequent handling and flexing.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003cli\u003eHigh-flex cable stock designed specifically for HD SDI patchcord applications; high flexibility coupled with tight impedance stability\u003c\/li\u003e\n \u003cli\u003eBroadcast-quality BNC crimp-style connectors on both ends\u003c\/li\u003e\n \u003cli\u003eAvailable in multiple jacket colors for ease of cable identification; search our listings for more\u003c\/li\u003e\n \u003cli\u003eRated CM for installation in walls\u003c\/li\u003e\n \u003cli\u003eBulk cable manufactured, and final assembly, in USA.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-08T04:12:01+10:00","created_at":"2021-04-08T04:12:01+10:00","vendor":"Blue Jeans Cable","type":"HDMI Cables","tags":["m20"],"price":16700,"price_min":16700,"price_max":16700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39729471881369,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00IITTCXQ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"10 Foot Green BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC","public_title":null,"options":["Default Title"],"price":16700,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":"BJCSDI10GF","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/soundstores.net\/cdn\/shop\/products\/B00IITTCXQ.jpg?v=1650575868"],"featured_image":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITTCXQ.jpg?v=1650575868","options":["Title"],"media":[{"alt":null,"id":26775554719897,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITTCXQ.jpg?v=1650575868"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITTCXQ.jpg?v=1650575868","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e10 Foot Green BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC\u003c\/h4\u003e\n\u003cp id=\"b\"\u003e10 foot Green High-Flex BNC to BNC 3G\/6G HD SDI Patch Cable, Blue Jeans Cable\nbrand This 3G\/6G HD-SDI cable is built with a special high-flexibility\nprecision video coax which has been sweep-tested to 4.5 GHz and broadcast-\nquality 75 ohm crimp-type BNCs. It has a compacted stranded copper center\nconductor and two 95% coverage braided bare copper shields laid one on top of\nthe other, a foamed HDPE dielectric, and soft pliable PVC jacket. These\nmaterials make for an unusually flexible precision video cable assembly,\nsuited for patch bays and for mobile installations or any situation where high\nflexibility and\/or flex life is required. The cable stock is made in the USA\nto exacting standards; every spool is sweep-tested to 4.5 GHz to ensure that\ndimensional control and impedance stability are within tight tolerances, and\nthat return loss is kept to a minimum. The BNCs, likewise, are true broadcast-\nquality products designed to minimize return loss through the plug body and\nplug\/jack interface. The cable is rated CM, making it lawful for installation\nin walls and cable trays--anywhere but in a riser or plenum. Blue Jeans Cable:\nProfessional Precision Cable Assembly Our cables are assembled in our Seattle\nworkshop by American workers, using the highest quality precision stripping\nand crimping equipment. Coax is stripped with precise dimensional control in\nour Swiss-made Schleuniger coaxial cable strippers, resulting in a shield\nbraid undamaged by stripping and a center conductor of consistent maximum\nlength for full engagement in the BNC pin crimp. Our crimping is done on\nSchleuniger 3-ton pneumatic presses--not on hand tools that can loosen and\nresult in a weak crimp. The result is a cable which is not only superb in its\nelectrical performance, but is physically robust and stable and will endure\nfrequent handling and flexing.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003cli\u003eHigh-flex cable stock designed specifically for HD SDI patchcord applications; high flexibility coupled with tight impedance stability\u003c\/li\u003e\n \u003cli\u003eBroadcast-quality BNC crimp-style connectors on both ends\u003c\/li\u003e\n \u003cli\u003eAvailable in multiple jacket colors for ease of cable identification; search our listings for more\u003c\/li\u003e\n \u003cli\u003eRated CM for installation in walls\u003c\/li\u003e\n \u003cli\u003eBulk cable manufactured, and final assembly, in USA.\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6673300488345,"title":"15 Foot Red BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC","handle":"15-foot-red-bjc-high-flex-3g-6g-hd-sdi-patch-cable-belden-1505f-bnc-to-bnc","description":"\u003ch4\u003e15 Foot Red BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC\u003c\/h4\u003e\n\u003cp id=\"b\"\u003e15 foot Red High-Flex BNC to BNC 3G\/6G HD SDI Patch Cable, Blue Jeans Cable\nbrand This 3G\/6G HD-SDI cable is built with a special high-flexibility\nprecision video coax which has been sweep-tested to 4.5 GHz and broadcast-\nquality 75 ohm crimp-type BNCs. It has a compacted stranded copper center\nconductor and two 95% coverage braided bare copper shields laid one on top of\nthe other, a foamed HDPE dielectric, and soft pliable PVC jacket. These\nmaterials make for an unusually flexible precision video cable assembly,\nsuited for patch bays and for mobile installations or any situation where high\nflexibility and\/or flex life is required. The cable stock is made in the USA\nto exacting standards; every spool is sweep-tested to 4.5 GHz to ensure that\ndimensional control and impedance stability are within tight tolerances, and\nthat return loss is kept to a minimum. The BNCs, likewise, are true broadcast-\nquality products designed to minimize return loss through the plug body and\nplug\/jack interface. The cable is rated CM, making it lawful for installation\nin walls and cable trays--anywhere but in a riser or plenum. Blue Jeans Cable:\nProfessional Precision Cable Assembly Our cables are assembled in our Seattle\nworkshop by American workers, using the highest quality precision stripping\nand crimping equipment. Coax is stripped with precise dimensional control in\nour Swiss-made Schleuniger coaxial cable strippers, resulting in a shield\nbraid undamaged by stripping and a center conductor of consistent maximum\nlength for full engagement in the BNC pin crimp. Our crimping is done on\nSchleuniger 3-ton pneumatic presses--not on hand tools that can loosen and\nresult in a weak crimp. The result is a cable which is not only superb in its\nelectrical performance, but is physically robust and stable and will endure\nfrequent handling and flexing.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003cli\u003eHigh-flex cable stock designed specifically for HD SDI patchcord applications; high flexibility coupled with tight impedance stability\u003c\/li\u003e\n \u003cli\u003eBroadcast-quality BNC crimp-style connectors on both ends\u003c\/li\u003e\n \u003cli\u003eAvailable in multiple jacket colors for ease of cable identification; search our listings for more\u003c\/li\u003e\n \u003cli\u003eRated CM for installation in walls\u003c\/li\u003e\n \u003cli\u003eBulk cable manufactured, and final assembly, in USA.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-08T00:46:14+10:00","created_at":"2021-04-08T00:46:14+10:00","vendor":"Blue Jeans Cable","type":"HDMI Cables","tags":["m20"],"price":21100,"price_min":21100,"price_max":21100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39728329326745,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00IITT2FO","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"15 Foot Red BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC","public_title":null,"options":["Default Title"],"price":21100,"weight":181,"compare_at_price":null,"inventory_management":null,"barcode":"811887013621","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/soundstores.net\/cdn\/shop\/products\/B00IITT2FO.jpg?v=1650559441"],"featured_image":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITT2FO.jpg?v=1650559441","options":["Title"],"media":[{"alt":null,"id":26773262565529,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITT2FO.jpg?v=1650559441"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITT2FO.jpg?v=1650559441","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e15 Foot Red BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC\u003c\/h4\u003e\n\u003cp id=\"b\"\u003e15 foot Red High-Flex BNC to BNC 3G\/6G HD SDI Patch Cable, Blue Jeans Cable\nbrand This 3G\/6G HD-SDI cable is built with a special high-flexibility\nprecision video coax which has been sweep-tested to 4.5 GHz and broadcast-\nquality 75 ohm crimp-type BNCs. It has a compacted stranded copper center\nconductor and two 95% coverage braided bare copper shields laid one on top of\nthe other, a foamed HDPE dielectric, and soft pliable PVC jacket. These\nmaterials make for an unusually flexible precision video cable assembly,\nsuited for patch bays and for mobile installations or any situation where high\nflexibility and\/or flex life is required. The cable stock is made in the USA\nto exacting standards; every spool is sweep-tested to 4.5 GHz to ensure that\ndimensional control and impedance stability are within tight tolerances, and\nthat return loss is kept to a minimum. The BNCs, likewise, are true broadcast-\nquality products designed to minimize return loss through the plug body and\nplug\/jack interface. The cable is rated CM, making it lawful for installation\nin walls and cable trays--anywhere but in a riser or plenum. Blue Jeans Cable:\nProfessional Precision Cable Assembly Our cables are assembled in our Seattle\nworkshop by American workers, using the highest quality precision stripping\nand crimping equipment. Coax is stripped with precise dimensional control in\nour Swiss-made Schleuniger coaxial cable strippers, resulting in a shield\nbraid undamaged by stripping and a center conductor of consistent maximum\nlength for full engagement in the BNC pin crimp. Our crimping is done on\nSchleuniger 3-ton pneumatic presses--not on hand tools that can loosen and\nresult in a weak crimp. The result is a cable which is not only superb in its\nelectrical performance, but is physically robust and stable and will endure\nfrequent handling and flexing.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003cli\u003eHigh-flex cable stock designed specifically for HD SDI patchcord applications; high flexibility coupled with tight impedance stability\u003c\/li\u003e\n \u003cli\u003eBroadcast-quality BNC crimp-style connectors on both ends\u003c\/li\u003e\n \u003cli\u003eAvailable in multiple jacket colors for ease of cable identification; search our listings for more\u003c\/li\u003e\n \u003cli\u003eRated CM for installation in walls\u003c\/li\u003e\n \u003cli\u003eBulk cable manufactured, and final assembly, in USA.\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6673907613849,"title":"25 Foot White BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC","handle":"25-foot-white-bjc-high-flex-3g-6g-hd-sdi-patch-cable-belden-1505f-bnc-to-bnc","description":"\u003ch4\u003e25 Foot White BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC\u003c\/h4\u003e\n\u003cp id=\"b\"\u003e25 foot White High-Flex BNC to BNC 3G\/6G HD SDI Patch Cable, Blue Jeans Cable\nbrand This 3G\/6G HD-SDI cable is built with a special high-flexibility\nprecision video coax which has been sweep-tested to 4.5 GHz and broadcast-\nquality 75 ohm crimp-type BNCs. It has a compacted stranded copper center\nconductor and two 95% coverage braided bare copper shields laid one on top of\nthe other, a foamed HDPE dielectric, and soft pliable PVC jacket. These\nmaterials make for an unusually flexible precision video cable assembly,\nsuited for patch bays and for mobile installations or any situation where high\nflexibility and\/or flex life is required. The cable stock is made in the USA\nto exacting standards; every spool is sweep-tested to 4.5 GHz to ensure that\ndimensional control and impedance stability are within tight tolerances, and\nthat return loss is kept to a minimum. The BNCs, likewise, are true broadcast-\nquality products designed to minimize return loss through the plug body and\nplug\/jack interface. The cable is rated CM, making it lawful for installation\nin walls and cable trays--anywhere but in a riser or plenum. Blue Jeans Cable:\nProfessional Precision Cable Assembly Our cables are assembled in our Seattle\nworkshop by American workers, using the highest quality precision stripping\nand crimping equipment. Coax is stripped with precise dimensional control in\nour Swiss-made Schleuniger coaxial cable strippers, resulting in a shield\nbraid undamaged by stripping and a center conductor of consistent maximum\nlength for full engagement in the BNC pin crimp. Our crimping is done on\nSchleuniger 3-ton pneumatic presses--not on hand tools that can loosen and\nresult in a weak crimp. The result is a cable which is not only superb in its\nelectrical performance, but is physically robust and stable and will endure\nfrequent handling and flexing.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003cli\u003eHigh-flex cable stock designed specifically for HD SDI patchcord applications; high flexibility coupled with tight impedance stability\u003c\/li\u003e\n \u003cli\u003eBroadcast-quality BNC crimp-style connectors on both ends\u003c\/li\u003e\n \u003cli\u003eAvailable in multiple jacket colors for ease of cable identification; search our listings for more\u003c\/li\u003e\n \u003cli\u003eRated CM for installation in walls\u003c\/li\u003e\n \u003cli\u003eBulk cable manufactured, and final assembly, in USA.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-08T05:56:01+10:00","created_at":"2021-04-08T05:56:01+10:00","vendor":"Blue Jeans Cable","type":"HDMI Cables","tags":["m20"],"price":25600,"price_min":25600,"price_max":25600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39729975361689,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00IIU29TY","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"25 Foot White BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC","public_title":null,"options":["Default Title"],"price":25600,"weight":386,"compare_at_price":null,"inventory_management":null,"barcode":"811887013768","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/soundstores.net\/cdn\/shop\/products\/B00IIU29TY.jpg?v=1650583607"],"featured_image":"\/\/soundstores.net\/cdn\/shop\/products\/B00IIU29TY.jpg?v=1650583607","options":["Title"],"media":[{"alt":null,"id":26776325882009,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IIU29TY.jpg?v=1650583607"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IIU29TY.jpg?v=1650583607","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003e25 Foot White BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC\u003c\/h4\u003e\n\u003cp id=\"b\"\u003e25 foot White High-Flex BNC to BNC 3G\/6G HD SDI Patch Cable, Blue Jeans Cable\nbrand This 3G\/6G HD-SDI cable is built with a special high-flexibility\nprecision video coax which has been sweep-tested to 4.5 GHz and broadcast-\nquality 75 ohm crimp-type BNCs. It has a compacted stranded copper center\nconductor and two 95% coverage braided bare copper shields laid one on top of\nthe other, a foamed HDPE dielectric, and soft pliable PVC jacket. These\nmaterials make for an unusually flexible precision video cable assembly,\nsuited for patch bays and for mobile installations or any situation where high\nflexibility and\/or flex life is required. The cable stock is made in the USA\nto exacting standards; every spool is sweep-tested to 4.5 GHz to ensure that\ndimensional control and impedance stability are within tight tolerances, and\nthat return loss is kept to a minimum. The BNCs, likewise, are true broadcast-\nquality products designed to minimize return loss through the plug body and\nplug\/jack interface. The cable is rated CM, making it lawful for installation\nin walls and cable trays--anywhere but in a riser or plenum. Blue Jeans Cable:\nProfessional Precision Cable Assembly Our cables are assembled in our Seattle\nworkshop by American workers, using the highest quality precision stripping\nand crimping equipment. Coax is stripped with precise dimensional control in\nour Swiss-made Schleuniger coaxial cable strippers, resulting in a shield\nbraid undamaged by stripping and a center conductor of consistent maximum\nlength for full engagement in the BNC pin crimp. Our crimping is done on\nSchleuniger 3-ton pneumatic presses--not on hand tools that can loosen and\nresult in a weak crimp. The result is a cable which is not only superb in its\nelectrical performance, but is physically robust and stable and will endure\nfrequent handling and flexing.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003cli\u003eHigh-flex cable stock designed specifically for HD SDI patchcord applications; high flexibility coupled with tight impedance stability\u003c\/li\u003e\n \u003cli\u003eBroadcast-quality BNC crimp-style connectors on both ends\u003c\/li\u003e\n \u003cli\u003eAvailable in multiple jacket colors for ease of cable identification; search our listings for more\u003c\/li\u003e\n \u003cli\u003eRated CM for installation in walls\u003c\/li\u003e\n \u003cli\u003eBulk cable manufactured, and final assembly, in USA.\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6991376253081,"title":"BJC Certified Cat 6 Cable, with Test Report, Assembled in USA (Black, 2 Foot) Black","handle":"bjc-certified-cat-6-cable-with-test-report-assembled-in-usa-black-2-foot-black","description":"\u003ch4\u003eBJC Certified Cat 6 Cable, with Test Report, Assembled in USA (Black, 2 Foot)\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eBJC Cat 6 cable -- Certified Quality Performance Cat 6\nseems like a simple affair -- four pairs of wire in a jacket. What's to mess\nup? It turns out that there's plenty. When we at Blue Jeans Cable first\nexamined the market for Cat 6 cables, we found that 80% of \"Cat 6\" cables sold\nonline and in brick-and-mortar stores failed to meet spec. Worse, about half\nof them didn't even meet the easier Cat 5e spec. In explaining this to people,\nwe encounter a fair bit of skepticism. Surely, people will say, there's a\nspec, and surely all the cables are built to meet it. But, as they say: \"Don't\ncall me Shirley.\" It's not quite so simple. Features of BJC Cat 6 Uses\nBelden's bonded-pair technology; pairs are joined, not merely twisted together\nAssembled in our shop in Seattle, WA Every cable is individually certified on\na certification tester and ships with its own test report 24 AWG solid bare\ncopper conductors Read more Certification Testing: Why, and What does it Do?\nCat 6 is not a construction spec, but a performance spec. The object, in\nmeeting spec, is to keep specific types of electrical loss and interference\nwithin acceptable limits. For Ethernet patch cords, these are return loss\n(signal reflections caused principally by impedance instability) and crosstalk\n(signal from one pair interfering with signals on another). Since good\nmaterials can make bad cables, even a cable assembled from the good stuff\nisn't guaranteed to pass spec; the only way to really tell is to run the cable\non a properly configured \"certification tester,\" which sweeps a Cat 6 cable\nwith frequencies up to 250 MHz and measures return loss and crosstalk all up\nand down the range. We use Fluke certification testers, and we use them on\nEVERY individual cable -- if it doesn't pass, it doesn't ship. Read more\nQuality Cable: twist rates and cable lay As simple as four twisted pairs look,\nmore is going on than meets the eye. The characteristic impedance of the pairs\nis critical, and depends upon consistent insulation thickness and tightness of\ntwisting. And the twist rates on the four pairs must differ in ways that are\nsufficiently mathematically un-related that it doesn't encourage crosstalk.\nThis isn't your grandfather's telephone wire. Quality Connectors Most people\nlike to use one-piece connectors, and for ease of application, they're great.\nBut the performance characteristics of the one-piece connectors tend to be\nproblematic: you need better dimensional and positional control of the wire to\nminimize RL and crosstalk. We use a three-piece connector from Sentinel in\nYork, PA, which is fiddly to apply but provides excellent, reproducible\nperformance. Quality Assembly: end prep and termination Quality cable and\nquality connectors will do you no good without quality assembly practices. Too\nmuch un-twisting of wires, careless alignment and crimping, and other little\nmistakes will cause RL and crosstalk spikes. Even WITH excellent termination\nquality, the worst part of the assembly will always be at the ends; the job of\nan experienced assembler is to minimize the harm which connectorization\ninevitably does to the cable performance.l Certification of EVERY cable\nThere's only one way to really know a cable is spec-compliant, and that's to\nrun it on a costly certification tester, like the Fluke units we use at BJC.\nSome assemblers don't test their cables at all; some test a sample now and\nthen; we test every last cable we build, and if it doesn't pass specification,\nit doesn't leave the building. We enclose the test report -- not a generic\nreport for our cable, but a specific report for YOUR finished cable assembly\n-- in the bag with each cable we make. Read more Blue Jeans Cable: Your Source\nfor Professional Cable Assembly Blue Jeans Cable is a cable assembly shop in\nSeattle, Washington. Almost everything we sell is manufactured right here on\nour own premises by American workers, and in most cases, those workers have\nbeen with us for years and years -- we make a point of trying to make this the\nsort of place where employees want to stay for the long haul, and the result\nis a crew with great depth of experience and knowledge in a broad range of\nproducts and assembly techniques. We've been assembling Ethernet cables for\nover a decade, and we are known for distinctive products as well: our LC-1\nunbalanced audio cable and our ultrasonically-welded speaker cables, among\nothers.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e","published_at":"2021-08-18T00:39:24+10:00","created_at":"2021-08-18T00:39:24+10:00","vendor":"Blue Jeans Cable","type":"Cat 6 Cables","tags":["cocoon"],"price":10900,"price_min":10900,"price_max":10900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40843710955673,"title":"Black \/ 2 foot","option1":"Black","option2":"2 foot","option3":null,"sku":"B00EIM4EXA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BJC Certified Cat 6 Cable, with Test Report, Assembled in USA (Black, 2 Foot) Black - Black \/ 2 foot","public_title":"Black \/ 2 foot","options":["Black","2 foot"],"price":10900,"weight":23,"compare_at_price":null,"inventory_management":null,"barcode":"811887013263","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/soundstores.net\/cdn\/shop\/products\/B00EIM4EXA.jpg?v=1629294170","\/\/soundstores.net\/cdn\/shop\/products\/81y1vb2P7jL.jpg?v=1629294170"],"featured_image":"\/\/soundstores.net\/cdn\/shop\/products\/B00EIM4EXA.jpg?v=1629294170","options":["Color","Size"],"media":[{"alt":null,"id":23916754796697,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1868,"width":1868,"src":"\/\/soundstores.net\/cdn\/shop\/products\/B00EIM4EXA.jpg?v=1629294170"},"aspect_ratio":1.0,"height":1868,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/B00EIM4EXA.jpg?v=1629294170","width":1868},{"alt":null,"id":23901953130649,"position":2,"preview_image":{"aspect_ratio":1.073,"height":2385,"width":2560,"src":"\/\/soundstores.net\/cdn\/shop\/products\/81y1vb2P7jL.jpg?v=1629294170"},"aspect_ratio":1.073,"height":2385,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/81y1vb2P7jL.jpg?v=1629294170","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eBJC Certified Cat 6 Cable, with Test Report, Assembled in USA (Black, 2 Foot)\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eBJC Cat 6 cable -- Certified Quality Performance Cat 6\nseems like a simple affair -- four pairs of wire in a jacket. What's to mess\nup? It turns out that there's plenty. When we at Blue Jeans Cable first\nexamined the market for Cat 6 cables, we found that 80% of \"Cat 6\" cables sold\nonline and in brick-and-mortar stores failed to meet spec. Worse, about half\nof them didn't even meet the easier Cat 5e spec. In explaining this to people,\nwe encounter a fair bit of skepticism. Surely, people will say, there's a\nspec, and surely all the cables are built to meet it. But, as they say: \"Don't\ncall me Shirley.\" It's not quite so simple. Features of BJC Cat 6 Uses\nBelden's bonded-pair technology; pairs are joined, not merely twisted together\nAssembled in our shop in Seattle, WA Every cable is individually certified on\na certification tester and ships with its own test report 24 AWG solid bare\ncopper conductors Read more Certification Testing: Why, and What does it Do?\nCat 6 is not a construction spec, but a performance spec. The object, in\nmeeting spec, is to keep specific types of electrical loss and interference\nwithin acceptable limits. For Ethernet patch cords, these are return loss\n(signal reflections caused principally by impedance instability) and crosstalk\n(signal from one pair interfering with signals on another). Since good\nmaterials can make bad cables, even a cable assembled from the good stuff\nisn't guaranteed to pass spec; the only way to really tell is to run the cable\non a properly configured \"certification tester,\" which sweeps a Cat 6 cable\nwith frequencies up to 250 MHz and measures return loss and crosstalk all up\nand down the range. We use Fluke certification testers, and we use them on\nEVERY individual cable -- if it doesn't pass, it doesn't ship. Read more\nQuality Cable: twist rates and cable lay As simple as four twisted pairs look,\nmore is going on than meets the eye. The characteristic impedance of the pairs\nis critical, and depends upon consistent insulation thickness and tightness of\ntwisting. And the twist rates on the four pairs must differ in ways that are\nsufficiently mathematically un-related that it doesn't encourage crosstalk.\nThis isn't your grandfather's telephone wire. Quality Connectors Most people\nlike to use one-piece connectors, and for ease of application, they're great.\nBut the performance characteristics of the one-piece connectors tend to be\nproblematic: you need better dimensional and positional control of the wire to\nminimize RL and crosstalk. We use a three-piece connector from Sentinel in\nYork, PA, which is fiddly to apply but provides excellent, reproducible\nperformance. Quality Assembly: end prep and termination Quality cable and\nquality connectors will do you no good without quality assembly practices. Too\nmuch un-twisting of wires, careless alignment and crimping, and other little\nmistakes will cause RL and crosstalk spikes. Even WITH excellent termination\nquality, the worst part of the assembly will always be at the ends; the job of\nan experienced assembler is to minimize the harm which connectorization\ninevitably does to the cable performance.l Certification of EVERY cable\nThere's only one way to really know a cable is spec-compliant, and that's to\nrun it on a costly certification tester, like the Fluke units we use at BJC.\nSome assemblers don't test their cables at all; some test a sample now and\nthen; we test every last cable we build, and if it doesn't pass specification,\nit doesn't leave the building. We enclose the test report -- not a generic\nreport for our cable, but a specific report for YOUR finished cable assembly\n-- in the bag with each cable we make. Read more Blue Jeans Cable: Your Source\nfor Professional Cable Assembly Blue Jeans Cable is a cable assembly shop in\nSeattle, Washington. Almost everything we sell is manufactured right here on\nour own premises by American workers, and in most cases, those workers have\nbeen with us for years and years -- we make a point of trying to make this the\nsort of place where employees want to stay for the long haul, and the result\nis a crew with great depth of experience and knowledge in a broad range of\nproducts and assembly techniques. We've been assembling Ethernet cables for\nover a decade, and we are known for distinctive products as well: our LC-1\nunbalanced audio cable and our ultrasonically-welded speaker cables, among\nothers.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e"}

{"id":6971358871705,"title":"BJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Black, 3 Foot) Black","handle":"bjc-certified-cat-6a-patch-cable-assembled-in-usa-with-test-report-black-3-foot-black","description":"\u003ch4\u003eBJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Black, 3 Foot)\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eBJC Cat 6A cable -- Certified Quality Performance Cat 6A\nseems like a simple affair -- four pairs of wire in a jacket. What's to mess\nup? It turns out that there's plenty. When we at Blue Jeans Cable first\nexamined the market for Cat 6A cables, we found that 80% of \"Cat 6A\" cables\nsold online and in brick-and-mortar stores failed to meet spec. Worse, about\nhalf of them didn't even meet the easier Cat 5e spec. In explaining this to\npeople, we encounter a fair bit of skepticism. Surely, people will say,\nthere's a spec, and surely all the cables are built to meet it. But, as they\nsay: \"Don't call me Shirley.\" It's not quite so simple. Features of BJC Cat 6A\nUses Belden's bonded-pair technology; pairs are joined, not merely twisted\ntogether Assembled in our shop in Seattle, WA Every cable is individually\ncertified on a certification tester and ships with its own test report 24 AWG\nsolid bare copper conductors Dissipative shield -- reduces alien crosstalk\nwithout the need for shielded plugs Read more Certification Testing: Why, and\nWhat does it Do? Cat 6A is not a construction spec, but a performance spec.\nThe object, in meeting spec, is to keep specific types of electrical loss and\ninterference within acceptable limits. For Ethernet patch cords, these are\nreturn loss (signal reflections caused principally by impedance instability)\nand crosstalk (signal from one pair interfering with signals on another).\nSince good materials can make bad cables, even a cable assembled from the good\nstuff isn't certain to pass spec; the only way to really tell is to run the\ncable on a properly configured \"certification tester,\" which sweeps a Cat 6A\ncable with frequencies up to 500 MHz and measures return loss and crosstalk\nall up and down the range. We use Fluke certification testers, and we use them\non EVERY individual cable -- if it doesn't pass, it doesn't ship. Read more\nQuality Cable: twist rates and cable lay As simple as four twisted pairs look,\nmore is going on than meets the eye. The characteristic impedance of the pairs\nis critical, and depends upon consistent insulation thickness and tightness of\ntwisting. And the twist rates on the four pairs must differ in ways that are\nsufficiently mathematically un-related that it doesn't encourage crosstalk.\nThis isn't your grandfather's telephone wire. Quality Connectors Most people\nlike to use one-piece connectors, and for ease of application, they're great.\nBut the performance characteristics of the one-piece connectors tend to be\nproblematic: you need better dimensional and positional control of the wire to\nminimize RL and crosstalk. We use a three-piece connector from Sentinel in\nYork, PA, which is fiddly to apply but provides excellent, reproducible\nperformance. Quality Assembly: end prep and termination Quality cable and\nquality connectors will do you no good without quality assembly practices. Too\nmuch un-twisting of wires, careless alignment and crimping, and other little\nmistakes will cause RL and crosstalk spikes. Even WITH excellent termination\nquality, the worst part of the assembly will always be at the ends; the job of\nan experienced assembler is to minimize the harm which connectorization\ninevitably does to the cable performance.l Certification of EVERY cable\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e","published_at":"2021-08-09T22:54:07+10:00","created_at":"2021-08-09T22:54:07+10:00","vendor":"Blue Jeans Cable","type":"Cat 6 Cables","tags":["cocoon"],"price":12900,"price_min":12900,"price_max":12900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40775791083673,"title":"Black \/ 3 foot","option1":"Black","option2":"3 foot","option3":null,"sku":"B00FY82OYS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Black, 3 Foot) Black - Black \/ 3 foot","public_title":"Black \/ 3 foot","options":["Black","3 foot"],"price":12900,"weight":10,"compare_at_price":null,"inventory_management":null,"barcode":"811887013362","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/soundstores.net\/cdn\/shop\/products\/B00FY82OYS.jpg?v=1650786454","\/\/soundstores.net\/cdn\/shop\/products\/81c_vxpgi8L.jpg?v=1628516743"],"featured_image":"\/\/soundstores.net\/cdn\/shop\/products\/B00FY82OYS.jpg?v=1650786454","options":["Color","Size"],"media":[{"alt":null,"id":26791848902809,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2100,"width":2100,"src":"\/\/soundstores.net\/cdn\/shop\/products\/B00FY82OYS.jpg?v=1650786454"},"aspect_ratio":1.0,"height":2100,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/B00FY82OYS.jpg?v=1650786454","width":2100},{"alt":null,"id":23782040961177,"position":2,"preview_image":{"aspect_ratio":1.087,"height":2356,"width":2560,"src":"\/\/soundstores.net\/cdn\/shop\/products\/81c_vxpgi8L.jpg?v=1628516743"},"aspect_ratio":1.087,"height":2356,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/81c_vxpgi8L.jpg?v=1628516743","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eBJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Black, 3 Foot)\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eBJC Cat 6A cable -- Certified Quality Performance Cat 6A\nseems like a simple affair -- four pairs of wire in a jacket. What's to mess\nup? It turns out that there's plenty. When we at Blue Jeans Cable first\nexamined the market for Cat 6A cables, we found that 80% of \"Cat 6A\" cables\nsold online and in brick-and-mortar stores failed to meet spec. Worse, about\nhalf of them didn't even meet the easier Cat 5e spec. In explaining this to\npeople, we encounter a fair bit of skepticism. Surely, people will say,\nthere's a spec, and surely all the cables are built to meet it. But, as they\nsay: \"Don't call me Shirley.\" It's not quite so simple. Features of BJC Cat 6A\nUses Belden's bonded-pair technology; pairs are joined, not merely twisted\ntogether Assembled in our shop in Seattle, WA Every cable is individually\ncertified on a certification tester and ships with its own test report 24 AWG\nsolid bare copper conductors Dissipative shield -- reduces alien crosstalk\nwithout the need for shielded plugs Read more Certification Testing: Why, and\nWhat does it Do? Cat 6A is not a construction spec, but a performance spec.\nThe object, in meeting spec, is to keep specific types of electrical loss and\ninterference within acceptable limits. For Ethernet patch cords, these are\nreturn loss (signal reflections caused principally by impedance instability)\nand crosstalk (signal from one pair interfering with signals on another).\nSince good materials can make bad cables, even a cable assembled from the good\nstuff isn't certain to pass spec; the only way to really tell is to run the\ncable on a properly configured \"certification tester,\" which sweeps a Cat 6A\ncable with frequencies up to 500 MHz and measures return loss and crosstalk\nall up and down the range. We use Fluke certification testers, and we use them\non EVERY individual cable -- if it doesn't pass, it doesn't ship. Read more\nQuality Cable: twist rates and cable lay As simple as four twisted pairs look,\nmore is going on than meets the eye. The characteristic impedance of the pairs\nis critical, and depends upon consistent insulation thickness and tightness of\ntwisting. And the twist rates on the four pairs must differ in ways that are\nsufficiently mathematically un-related that it doesn't encourage crosstalk.\nThis isn't your grandfather's telephone wire. Quality Connectors Most people\nlike to use one-piece connectors, and for ease of application, they're great.\nBut the performance characteristics of the one-piece connectors tend to be\nproblematic: you need better dimensional and positional control of the wire to\nminimize RL and crosstalk. We use a three-piece connector from Sentinel in\nYork, PA, which is fiddly to apply but provides excellent, reproducible\nperformance. Quality Assembly: end prep and termination Quality cable and\nquality connectors will do you no good without quality assembly practices. Too\nmuch un-twisting of wires, careless alignment and crimping, and other little\nmistakes will cause RL and crosstalk spikes. Even WITH excellent termination\nquality, the worst part of the assembly will always be at the ends; the job of\nan experienced assembler is to minimize the harm which connectorization\ninevitably does to the cable performance.l Certification of EVERY cable\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e"}

{"id":6991323332761,"title":"BJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Black, 8 Foot) Black","handle":"bjc-certified-cat-6a-patch-cable-assembled-in-usa-with-test-report-black-8-foot-black","description":"\u003ch4\u003eBJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Black, 8 Foot)\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eBJC Cat 6A cable -- Certified Quality Performance Cat 6A\nseems like a simple affair -- four pairs of wire in a jacket. What's to mess\nup? It turns out that there's plenty. When we at Blue Jeans Cable first\nexamined the market for Cat 6A cables, we found that 80% of \"Cat 6A\" cables\nsold online and in brick-and-mortar stores failed to meet spec. Worse, about\nhalf of them didn't even meet the easier Cat 5e spec. In explaining this to\npeople, we encounter a fair bit of skepticism. Surely, people will say,\nthere's a spec, and surely all the cables are built to meet it. But, as they\nsay: \"Don't call me Shirley.\" It's not quite so simple. Features of BJC Cat 6A\nUses Belden's bonded-pair technology; pairs are joined, not merely twisted\ntogether Assembled in our shop in Seattle, WA Every cable is individually\ncertified on a certification tester and ships with its own test report 24 AWG\nsolid bare copper conductors Dissipative shield -- reduces alien crosstalk\nwithout the need for shielded plugs Read more Certification Testing: Why, and\nWhat does it Do? Cat 6A is not a construction spec, but a performance spec.\nThe object, in meeting spec, is to keep specific types of electrical loss and\ninterference within acceptable limits. For Ethernet patch cords, these are\nreturn loss (signal reflections caused principally by impedance instability)\nand crosstalk (signal from one pair interfering with signals on another).\nSince good materials can make bad cables, even a cable assembled from the good\nstuff isn't certain to pass spec; the only way to really tell is to run the\ncable on a properly configured \"certification tester,\" which sweeps a Cat 6A\ncable with frequencies up to 500 MHz and measures return loss and crosstalk\nall up and down the range. We use Fluke certification testers, and we use them\non EVERY individual cable -- if it doesn't pass, it doesn't ship. Read more\nQuality Cable: twist rates and cable lay As simple as four twisted pairs look,\nmore is going on than meets the eye. The characteristic impedance of the pairs\nis critical, and depends upon consistent insulation thickness and tightness of\ntwisting. And the twist rates on the four pairs must differ in ways that are\nsufficiently mathematically un-related that it doesn't encourage crosstalk.\nThis isn't your grandfather's telephone wire. Quality Connectors Most people\nlike to use one-piece connectors, and for ease of application, they're great.\nBut the performance characteristics of the one-piece connectors tend to be\nproblematic: you need better dimensional and positional control of the wire to\nminimize RL and crosstalk. We use a three-piece connector from Sentinel in\nYork, PA, which is fiddly to apply but provides excellent, reproducible\nperformance. Quality Assembly: end prep and termination Quality cable and\nquality connectors will do you no good without quality assembly practices. Too\nmuch un-twisting of wires, careless alignment and crimping, and other little\nmistakes will cause RL and crosstalk spikes. Even WITH excellent termination\nquality, the worst part of the assembly will always be at the ends; the job of\nan experienced assembler is to minimize the harm which connectorization\ninevitably does to the cable performance.l Certification of EVERY cable\nThere's only one way to really know a cable is spec-compliant, and that's to\nrun it on a costly certification tester, like the Fluke units we use at BJC.\nSome assemblers don't test their cables at all; some test a sample now and\nthen; we test every last cable we build, and if it doesn't pass specification,\nit doesn't leave the building. We enclose the test report -- not a generic\nreport for our cable, but a specific report for YOUR finished cable assembly\n-- in the bag with each cable we make. Read more Blue Jeans Cable: Your Source\nfor Professional Cable Assembly Blue Jeans Cable is a cable assembly shop in\nSeattle, Washington. Almost everything we sell is manufactured right here on\nour own premises by American workers, and in most cases, those workers have\nbeen with us for years and years -- we make a point of trying to make this the\nsort of place where employees want to stay for the long haul, and the result\nis a crew with great depth of experience and knowledge in a broad range of\nproducts and assembly techniques. We've been assembling Ethernet cables for\nover a decade, and we are known for distinctive products as well: our LC-1\nunbalanced audio cable and our ultrasonically-welded speaker cables, among\nothers.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e","published_at":"2021-08-18T00:17:41+10:00","created_at":"2021-08-18T00:17:41+10:00","vendor":"Blue Jeans Cable","type":"Cat 6 Cables","tags":["cocoon"],"price":14600,"price_min":14600,"price_max":14600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40843506483353,"title":"Black \/ 8 foot","option1":"Black","option2":"8 foot","option3":null,"sku":"B00IITTJS4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Black, 8 Foot) Black - Black \/ 8 foot","public_title":"Black \/ 8 foot","options":["Black","8 foot"],"price":14600,"weight":23,"compare_at_price":null,"inventory_management":null,"barcode":"811887013591","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/soundstores.net\/cdn\/shop\/products\/B00IITTJS4.jpg?v=1629293107"],"featured_image":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITTJS4.jpg?v=1629293107","options":["Color","Size"],"media":[{"alt":null,"id":23916599378073,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2100,"width":2100,"src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITTJS4.jpg?v=1629293107"},"aspect_ratio":1.0,"height":2100,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITTJS4.jpg?v=1629293107","width":2100}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eBJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Black, 8 Foot)\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eBJC Cat 6A cable -- Certified Quality Performance Cat 6A\nseems like a simple affair -- four pairs of wire in a jacket. What's to mess\nup? It turns out that there's plenty. When we at Blue Jeans Cable first\nexamined the market for Cat 6A cables, we found that 80% of \"Cat 6A\" cables\nsold online and in brick-and-mortar stores failed to meet spec. Worse, about\nhalf of them didn't even meet the easier Cat 5e spec. In explaining this to\npeople, we encounter a fair bit of skepticism. Surely, people will say,\nthere's a spec, and surely all the cables are built to meet it. But, as they\nsay: \"Don't call me Shirley.\" It's not quite so simple. Features of BJC Cat 6A\nUses Belden's bonded-pair technology; pairs are joined, not merely twisted\ntogether Assembled in our shop in Seattle, WA Every cable is individually\ncertified on a certification tester and ships with its own test report 24 AWG\nsolid bare copper conductors Dissipative shield -- reduces alien crosstalk\nwithout the need for shielded plugs Read more Certification Testing: Why, and\nWhat does it Do? Cat 6A is not a construction spec, but a performance spec.\nThe object, in meeting spec, is to keep specific types of electrical loss and\ninterference within acceptable limits. For Ethernet patch cords, these are\nreturn loss (signal reflections caused principally by impedance instability)\nand crosstalk (signal from one pair interfering with signals on another).\nSince good materials can make bad cables, even a cable assembled from the good\nstuff isn't certain to pass spec; the only way to really tell is to run the\ncable on a properly configured \"certification tester,\" which sweeps a Cat 6A\ncable with frequencies up to 500 MHz and measures return loss and crosstalk\nall up and down the range. We use Fluke certification testers, and we use them\non EVERY individual cable -- if it doesn't pass, it doesn't ship. Read more\nQuality Cable: twist rates and cable lay As simple as four twisted pairs look,\nmore is going on than meets the eye. The characteristic impedance of the pairs\nis critical, and depends upon consistent insulation thickness and tightness of\ntwisting. And the twist rates on the four pairs must differ in ways that are\nsufficiently mathematically un-related that it doesn't encourage crosstalk.\nThis isn't your grandfather's telephone wire. Quality Connectors Most people\nlike to use one-piece connectors, and for ease of application, they're great.\nBut the performance characteristics of the one-piece connectors tend to be\nproblematic: you need better dimensional and positional control of the wire to\nminimize RL and crosstalk. We use a three-piece connector from Sentinel in\nYork, PA, which is fiddly to apply but provides excellent, reproducible\nperformance. Quality Assembly: end prep and termination Quality cable and\nquality connectors will do you no good without quality assembly practices. Too\nmuch un-twisting of wires, careless alignment and crimping, and other little\nmistakes will cause RL and crosstalk spikes. Even WITH excellent termination\nquality, the worst part of the assembly will always be at the ends; the job of\nan experienced assembler is to minimize the harm which connectorization\ninevitably does to the cable performance.l Certification of EVERY cable\nThere's only one way to really know a cable is spec-compliant, and that's to\nrun it on a costly certification tester, like the Fluke units we use at BJC.\nSome assemblers don't test their cables at all; some test a sample now and\nthen; we test every last cable we build, and if it doesn't pass specification,\nit doesn't leave the building. We enclose the test report -- not a generic\nreport for our cable, but a specific report for YOUR finished cable assembly\n-- in the bag with each cable we make. Read more Blue Jeans Cable: Your Source\nfor Professional Cable Assembly Blue Jeans Cable is a cable assembly shop in\nSeattle, Washington. Almost everything we sell is manufactured right here on\nour own premises by American workers, and in most cases, those workers have\nbeen with us for years and years -- we make a point of trying to make this the\nsort of place where employees want to stay for the long haul, and the result\nis a crew with great depth of experience and knowledge in a broad range of\nproducts and assembly techniques. We've been assembling Ethernet cables for\nover a decade, and we are known for distinctive products as well: our LC-1\nunbalanced audio cable and our ultrasonically-welded speaker cables, among\nothers.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e"}

{"id":6971398226073,"title":"BJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Blue, 3 Foot) Blue","handle":"bjc-certified-cat-6a-patch-cable-assembled-in-usa-with-test-report-blue-3-foot-blue","description":"\u003ch4\u003eBJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Blue, 3 Foot)\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eBJC Cat 6A cable -- Certified Quality Performance Cat 6A\nseems like a simple affair -- four pairs of wire in a jacket. What's to mess\nup? It turns out that there's plenty. When we at Blue Jeans Cable first\nexamined the market for Cat 6A cables, we found that 80% of \"Cat 6A\" cables\nsold online and in brick-and-mortar stores failed to meet spec. Worse, about\nhalf of them didn't even meet the easier Cat 5e spec. In explaining this to\npeople, we encounter a fair bit of skepticism. Surely, people will say,\nthere's a spec, and surely all the cables are built to meet it. But, as they\nsay: \"Don't call me Shirley.\" It's not quite so simple. Features of BJC Cat 6A\nUses Belden's bonded-pair technology; pairs are joined, not merely twisted\ntogether Assembled in our shop in Seattle, WA Every cable is individually\ncertified on a certification tester and ships with its own test report 24 AWG\nsolid bare copper conductors Dissipative shield -- reduces alien crosstalk\nwithout the need for shielded plugs Read more Certification Testing: Why, and\nWhat does it Do? Cat 6A is not a construction spec, but a performance spec.\nThe object, in meeting spec, is to keep specific types of electrical loss and\ninterference within acceptable limits. For Ethernet patch cords, these are\nreturn loss (signal reflections caused principally by impedance instability)\nand crosstalk (signal from one pair interfering with signals on another).\nSince good materials can make bad cables, even a cable assembled from the good\nstuff isn't certain to pass spec; the only way to really tell is to run the\ncable on a properly configured \"certification tester,\" which sweeps a Cat 6A\ncable with frequencies up to 500 MHz and measures return loss and crosstalk\nall up and down the range. We use Fluke certification testers, and we use them\non EVERY individual cable -- if it doesn't pass, it doesn't ship. Read more\nQuality Cable: twist rates and cable lay As simple as four twisted pairs look,\nmore is going on than meets the eye. The characteristic impedance of the pairs\nis critical, and depends upon consistent insulation thickness and tightness of\ntwisting. And the twist rates on the four pairs must differ in ways that are\nsufficiently mathematically un-related that it doesn't encourage crosstalk.\nThis isn't your grandfather's telephone wire. Quality Connectors Most people\nlike to use one-piece connectors, and for ease of application, they're great.\nBut the performance characteristics of the one-piece connectors tend to be\nproblematic: you need better dimensional and positional control of the wire to\nminimize RL and crosstalk. We use a three-piece connector from Sentinel in\nYork, PA, which is fiddly to apply but provides excellent, reproducible\nperformance. Quality Assembly: end prep and termination Quality cable and\nquality connectors will do you no good without quality assembly practices. Too\nmuch un-twisting of wires, careless alignment and crimping, and other little\nmistakes will cause RL and crosstalk spikes. Even WITH excellent termination\nquality, the worst part of the assembly will always be at the ends; the job of\nan experienced assembler is to minimize the harm which connectorization\ninevitably does to the cable performance.l Certification of EVERY cable\nThere's only one way to really know a cable is spec-compliant, and that's to\nrun it on a costly certification tester, like the Fluke units we use at BJC.\nSome assemblers don't test their cables at all; some test a sample now and\nthen; we test every last cable we build, and if it doesn't pass specification,\nit doesn't leave the building. We enclose the test report -- not a generic\nreport for our cable, but a specific report for YOUR finished cable assembly\n-- in the bag with each cable we make. Read more Blue Jeans Cable: Your Source\nfor Professional Cable Assembly Blue Jeans Cable is a cable assembly shop in\nSeattle, Washington. Almost everything we sell is manufactured right here on\nour own premises by American workers, and in most cases, those workers have\nbeen with us for years and years -- we make a point of trying to make this the\nsort of place where employees want to stay for the long haul, and the result\nis a crew with great depth of experience and knowledge in a broad range of\nproducts and assembly techniques. We've been assembling Ethernet cables for\nover a decade, and we are known for distinctive products as well: our LC-1\nunbalanced audio cable and our ultrasonically-welded speaker cables, among\nothers.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e","published_at":"2021-08-09T23:07:26+10:00","created_at":"2021-08-09T23:07:26+10:00","vendor":"Blue Jeans Cable","type":"Cat 6 Cables","tags":["cocoon"],"price":12900,"price_min":12900,"price_max":12900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40775862157465,"title":"Blue \/ 3 foot","option1":"Blue","option2":"3 foot","option3":null,"sku":"B00IITTA6U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Blue, 3 Foot) Blue - Blue \/ 3 foot","public_title":"Blue \/ 3 foot","options":["Blue","3 foot"],"price":12900,"weight":10,"compare_at_price":null,"inventory_management":null,"barcode":"811887013454","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/soundstores.net\/cdn\/shop\/products\/B00IITTA6U.jpg?v=1650787156"],"featured_image":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITTA6U.jpg?v=1650787156","options":["Color","Size"],"media":[{"alt":null,"id":26791873675417,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITTA6U.jpg?v=1650787156"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITTA6U.jpg?v=1650787156","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eBJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Blue, 3 Foot)\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eBJC Cat 6A cable -- Certified Quality Performance Cat 6A\nseems like a simple affair -- four pairs of wire in a jacket. What's to mess\nup? It turns out that there's plenty. When we at Blue Jeans Cable first\nexamined the market for Cat 6A cables, we found that 80% of \"Cat 6A\" cables\nsold online and in brick-and-mortar stores failed to meet spec. Worse, about\nhalf of them didn't even meet the easier Cat 5e spec. In explaining this to\npeople, we encounter a fair bit of skepticism. Surely, people will say,\nthere's a spec, and surely all the cables are built to meet it. But, as they\nsay: \"Don't call me Shirley.\" It's not quite so simple. Features of BJC Cat 6A\nUses Belden's bonded-pair technology; pairs are joined, not merely twisted\ntogether Assembled in our shop in Seattle, WA Every cable is individually\ncertified on a certification tester and ships with its own test report 24 AWG\nsolid bare copper conductors Dissipative shield -- reduces alien crosstalk\nwithout the need for shielded plugs Read more Certification Testing: Why, and\nWhat does it Do? Cat 6A is not a construction spec, but a performance spec.\nThe object, in meeting spec, is to keep specific types of electrical loss and\ninterference within acceptable limits. For Ethernet patch cords, these are\nreturn loss (signal reflections caused principally by impedance instability)\nand crosstalk (signal from one pair interfering with signals on another).\nSince good materials can make bad cables, even a cable assembled from the good\nstuff isn't certain to pass spec; the only way to really tell is to run the\ncable on a properly configured \"certification tester,\" which sweeps a Cat 6A\ncable with frequencies up to 500 MHz and measures return loss and crosstalk\nall up and down the range. We use Fluke certification testers, and we use them\non EVERY individual cable -- if it doesn't pass, it doesn't ship. Read more\nQuality Cable: twist rates and cable lay As simple as four twisted pairs look,\nmore is going on than meets the eye. The characteristic impedance of the pairs\nis critical, and depends upon consistent insulation thickness and tightness of\ntwisting. And the twist rates on the four pairs must differ in ways that are\nsufficiently mathematically un-related that it doesn't encourage crosstalk.\nThis isn't your grandfather's telephone wire. Quality Connectors Most people\nlike to use one-piece connectors, and for ease of application, they're great.\nBut the performance characteristics of the one-piece connectors tend to be\nproblematic: you need better dimensional and positional control of the wire to\nminimize RL and crosstalk. We use a three-piece connector from Sentinel in\nYork, PA, which is fiddly to apply but provides excellent, reproducible\nperformance. Quality Assembly: end prep and termination Quality cable and\nquality connectors will do you no good without quality assembly practices. Too\nmuch un-twisting of wires, careless alignment and crimping, and other little\nmistakes will cause RL and crosstalk spikes. Even WITH excellent termination\nquality, the worst part of the assembly will always be at the ends; the job of\nan experienced assembler is to minimize the harm which connectorization\ninevitably does to the cable performance.l Certification of EVERY cable\nThere's only one way to really know a cable is spec-compliant, and that's to\nrun it on a costly certification tester, like the Fluke units we use at BJC.\nSome assemblers don't test their cables at all; some test a sample now and\nthen; we test every last cable we build, and if it doesn't pass specification,\nit doesn't leave the building. We enclose the test report -- not a generic\nreport for our cable, but a specific report for YOUR finished cable assembly\n-- in the bag with each cable we make. Read more Blue Jeans Cable: Your Source\nfor Professional Cable Assembly Blue Jeans Cable is a cable assembly shop in\nSeattle, Washington. Almost everything we sell is manufactured right here on\nour own premises by American workers, and in most cases, those workers have\nbeen with us for years and years -- we make a point of trying to make this the\nsort of place where employees want to stay for the long haul, and the result\nis a crew with great depth of experience and knowledge in a broad range of\nproducts and assembly techniques. We've been assembling Ethernet cables for\nover a decade, and we are known for distinctive products as well: our LC-1\nunbalanced audio cable and our ultrasonically-welded speaker cables, among\nothers.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e"}

{"id":6971356676249,"title":"BJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Blue, 5 Foot) Blue","handle":"bjc-certified-cat-6a-patch-cable-assembled-in-usa-with-test-report-blue-5-foot-blue","description":"\u003ch4\u003eBJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Blue, 5 Foot)\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eBJC Cat 6A cable -- Certified Quality Performance Cat 6A\nseems like a simple affair -- four pairs of wire in a jacket. What's to mess\nup? It turns out that there's plenty. When we at Blue Jeans Cable first\nexamined the market for Cat 6A cables, we found that 80% of \"Cat 6A\" cables\nsold online and in brick-and-mortar stores failed to meet spec. Worse, about\nhalf of them didn't even meet the easier Cat 5e spec. In explaining this to\npeople, we encounter a fair bit of skepticism. Surely, people will say,\nthere's a spec, and surely all the cables are built to meet it. But, as they\nsay: \"Don't call me Shirley.\" It's not quite so simple. Features of BJC Cat 6A\nUses Belden's bonded-pair technology; pairs are joined, not merely twisted\ntogether Assembled in our shop in Seattle, WA Every cable is individually\ncertified on a certification tester and ships with its own test report 24 AWG\nsolid bare copper conductors Dissipative shield -- reduces alien crosstalk\nwithout the need for shielded plugs Read more Certification Testing: Why, and\nWhat does it Do? Cat 6A is not a construction spec, but a performance spec.\nThe object, in meeting spec, is to keep specific types of electrical loss and\ninterference within acceptable limits. For Ethernet patch cords, these are\nreturn loss (signal reflections caused principally by impedance instability)\nand crosstalk (signal from one pair interfering with signals on another).\nSince good materials can make bad cables, even a cable assembled from the good\nstuff isn't certain to pass spec; the only way to really tell is to run the\ncable on a properly configured \"certification tester,\" which sweeps a Cat 6A\ncable with frequencies up to 500 MHz and measures return loss and crosstalk\nall up and down the range. We use Fluke certification testers, and we use them\non EVERY individual cable -- if it doesn't pass, it doesn't ship. Read more\nQuality Cable: twist rates and cable lay As simple as four twisted pairs look,\nmore is going on than meets the eye. The characteristic impedance of the pairs\nis critical, and depends upon consistent insulation thickness and tightness of\ntwisting. And the twist rates on the four pairs must differ in ways that are\nsufficiently mathematically un-related that it doesn't encourage crosstalk.\nThis isn't your grandfather's telephone wire. Quality Connectors Most people\nlike to use one-piece connectors, and for ease of application, they're great.\nBut the performance characteristics of the one-piece connectors tend to be\nproblematic: you need better dimensional and positional control of the wire to\nminimize RL and crosstalk. We use a three-piece connector from Sentinel in\nYork, PA, which is fiddly to apply but provides excellent, reproducible\nperformance. Quality Assembly: end prep and termination Quality cable and\nquality connectors will do you no good without quality assembly practices. Too\nmuch un-twisting of wires, careless alignment and crimping, and other little\nmistakes will cause RL and crosstalk spikes. Even WITH excellent termination\nquality, the worst part of the assembly will always be at the ends; the job of\nan experienced assembler is to minimize the harm which connectorization\ninevitably does to the cable performance.l Certification of EVERY cable\nThere's only one way to really know a cable is spec-compliant, and that's to\nrun it on a costly certification tester, like the Fluke units we use at BJC.\nSome assemblers don't test their cables at all; some test a sample now and\nthen; we test every last cable we build, and if it doesn't pass specification,\nit doesn't leave the building. We enclose the test report -- not a generic\nreport for our cable, but a specific report for YOUR finished cable assembly\n-- in the bag with each cable we make. Read more Blue Jeans Cable: Your Source\nfor Professional Cable Assembly Blue Jeans Cable is a cable assembly shop in\nSeattle, Washington. Almost everything we sell is manufactured right here on\nour own premises by American workers, and in most cases, those workers have\nbeen with us for years and years -- we make a point of trying to make this the\nsort of place where employees want to stay for the long haul, and the result\nis a crew with great depth of experience and knowledge in a broad range of\nproducts and assembly techniques. We've been assembling Ethernet cables for\nover a decade, and we are known for distinctive products as well: our LC-1\nunbalanced audio cable and our ultrasonically-welded speaker cables, among\nothers.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e","published_at":"2021-08-09T22:53:12+10:00","created_at":"2021-08-09T22:53:12+10:00","vendor":"Blue Jeans Cable","type":"Cat 6 Cables","tags":["cocoon"],"price":13500,"price_min":13500,"price_max":13500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40775787282585,"title":"Blue \/ 5 foot","option1":"Blue","option2":"5 foot","option3":null,"sku":"B00IITTBRS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Blue, 5 Foot) Blue - Blue \/ 5 foot","public_title":"Blue \/ 5 foot","options":["Blue","5 foot"],"price":13500,"weight":10,"compare_at_price":null,"inventory_management":null,"barcode":"811887013478","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/soundstores.net\/cdn\/shop\/products\/B00IITTBRS.jpg?v=1650786409"],"featured_image":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITTBRS.jpg?v=1650786409","options":["Color","Size"],"media":[{"alt":null,"id":26791846379673,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITTBRS.jpg?v=1650786409"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITTBRS.jpg?v=1650786409","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eBJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Blue, 5 Foot)\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eBJC Cat 6A cable -- Certified Quality Performance Cat 6A\nseems like a simple affair -- four pairs of wire in a jacket. What's to mess\nup? It turns out that there's plenty. When we at Blue Jeans Cable first\nexamined the market for Cat 6A cables, we found that 80% of \"Cat 6A\" cables\nsold online and in brick-and-mortar stores failed to meet spec. Worse, about\nhalf of them didn't even meet the easier Cat 5e spec. In explaining this to\npeople, we encounter a fair bit of skepticism. Surely, people will say,\nthere's a spec, and surely all the cables are built to meet it. But, as they\nsay: \"Don't call me Shirley.\" It's not quite so simple. Features of BJC Cat 6A\nUses Belden's bonded-pair technology; pairs are joined, not merely twisted\ntogether Assembled in our shop in Seattle, WA Every cable is individually\ncertified on a certification tester and ships with its own test report 24 AWG\nsolid bare copper conductors Dissipative shield -- reduces alien crosstalk\nwithout the need for shielded plugs Read more Certification Testing: Why, and\nWhat does it Do? Cat 6A is not a construction spec, but a performance spec.\nThe object, in meeting spec, is to keep specific types of electrical loss and\ninterference within acceptable limits. For Ethernet patch cords, these are\nreturn loss (signal reflections caused principally by impedance instability)\nand crosstalk (signal from one pair interfering with signals on another).\nSince good materials can make bad cables, even a cable assembled from the good\nstuff isn't certain to pass spec; the only way to really tell is to run the\ncable on a properly configured \"certification tester,\" which sweeps a Cat 6A\ncable with frequencies up to 500 MHz and measures return loss and crosstalk\nall up and down the range. We use Fluke certification testers, and we use them\non EVERY individual cable -- if it doesn't pass, it doesn't ship. Read more\nQuality Cable: twist rates and cable lay As simple as four twisted pairs look,\nmore is going on than meets the eye. The characteristic impedance of the pairs\nis critical, and depends upon consistent insulation thickness and tightness of\ntwisting. And the twist rates on the four pairs must differ in ways that are\nsufficiently mathematically un-related that it doesn't encourage crosstalk.\nThis isn't your grandfather's telephone wire. Quality Connectors Most people\nlike to use one-piece connectors, and for ease of application, they're great.\nBut the performance characteristics of the one-piece connectors tend to be\nproblematic: you need better dimensional and positional control of the wire to\nminimize RL and crosstalk. We use a three-piece connector from Sentinel in\nYork, PA, which is fiddly to apply but provides excellent, reproducible\nperformance. Quality Assembly: end prep and termination Quality cable and\nquality connectors will do you no good without quality assembly practices. Too\nmuch un-twisting of wires, careless alignment and crimping, and other little\nmistakes will cause RL and crosstalk spikes. Even WITH excellent termination\nquality, the worst part of the assembly will always be at the ends; the job of\nan experienced assembler is to minimize the harm which connectorization\ninevitably does to the cable performance.l Certification of EVERY cable\nThere's only one way to really know a cable is spec-compliant, and that's to\nrun it on a costly certification tester, like the Fluke units we use at BJC.\nSome assemblers don't test their cables at all; some test a sample now and\nthen; we test every last cable we build, and if it doesn't pass specification,\nit doesn't leave the building. We enclose the test report -- not a generic\nreport for our cable, but a specific report for YOUR finished cable assembly\n-- in the bag with each cable we make. Read more Blue Jeans Cable: Your Source\nfor Professional Cable Assembly Blue Jeans Cable is a cable assembly shop in\nSeattle, Washington. Almost everything we sell is manufactured right here on\nour own premises by American workers, and in most cases, those workers have\nbeen with us for years and years -- we make a point of trying to make this the\nsort of place where employees want to stay for the long haul, and the result\nis a crew with great depth of experience and knowledge in a broad range of\nproducts and assembly techniques. We've been assembling Ethernet cables for\nover a decade, and we are known for distinctive products as well: our LC-1\nunbalanced audio cable and our ultrasonically-welded speaker cables, among\nothers.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e"}

{"id":6971434369177,"title":"BJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Blue, 6 Foot) Blue","handle":"bjc-certified-cat-6a-patch-cable-assembled-in-usa-with-test-report-blue-6-foot-blue","description":"\u003ch4\u003eBJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Blue, 6 Foot)\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eBJC Cat 6A cable -- Certified Quality Performance Cat 6A\nseems like a simple affair -- four pairs of wire in a jacket. What's to mess\nup? It turns out that there's plenty. When we at Blue Jeans Cable first\nexamined the market for Cat 6A cables, we found that 80% of \"Cat 6A\" cables\nsold online and in brick-and-mortar stores failed to meet spec. Worse, about\nhalf of them didn't even meet the easier Cat 5e spec. In explaining this to\npeople, we encounter a fair bit of skepticism. Surely, people will say,\nthere's a spec, and surely all the cables are built to meet it. But, as they\nsay: \"Don't call me Shirley.\" It's not quite so simple. Features of BJC Cat 6A\nUses Belden's bonded-pair technology; pairs are joined, not merely twisted\ntogether Assembled in our shop in Seattle, WA Every cable is individually\ncertified on a certification tester and ships with its own test report 24 AWG\nsolid bare copper conductors Dissipative shield -- reduces alien crosstalk\nwithout the need for shielded plugs Read more Certification Testing: Why, and\nWhat does it Do? Cat 6A is not a construction spec, but a performance spec.\nThe object, in meeting spec, is to keep specific types of electrical loss and\ninterference within acceptable limits. For Ethernet patch cords, these are\nreturn loss (signal reflections caused principally by impedance instability)\nand crosstalk (signal from one pair interfering with signals on another).\nSince good materials can make bad cables, even a cable assembled from the good\nstuff isn't certain to pass spec; the only way to really tell is to run the\ncable on a properly configured \"certification tester,\" which sweeps a Cat 6A\ncable with frequencies up to 500 MHz and measures return loss and crosstalk\nall up and down the range. We use Fluke certification testers, and we use them\non EVERY individual cable -- if it doesn't pass, it doesn't ship. Read more\nQuality Cable: twist rates and cable lay As simple as four twisted pairs look,\nmore is going on than meets the eye. The characteristic impedance of the pairs\nis critical, and depends upon consistent insulation thickness and tightness of\ntwisting. And the twist rates on the four pairs must differ in ways that are\nsufficiently mathematically un-related that it doesn't encourage crosstalk.\nThis isn't your grandfather's telephone wire. Quality Connectors Most people\nlike to use one-piece connectors, and for ease of application, they're great.\nBut the performance characteristics of the one-piece connectors tend to be\nproblematic: you need better dimensional and positional control of the wire to\nminimize RL and crosstalk. We use a three-piece connector from Sentinel in\nYork, PA, which is fiddly to apply but provides excellent, reproducible\nperformance. Quality Assembly: end prep and termination Quality cable and\nquality connectors will do you no good without quality assembly practices. Too\nmuch un-twisting of wires, careless alignment and crimping, and other little\nmistakes will cause RL and crosstalk spikes. Even WITH excellent termination\nquality, the worst part of the assembly will always be at the ends; the job of\nan experienced assembler is to minimize the harm which connectorization\ninevitably does to the cable performance.l Certification of EVERY cable\nThere's only one way to really know a cable is spec-compliant, and that's to\nrun it on a costly certification tester, like the Fluke units we use at BJC.\nSome assemblers don't test their cables at all; some test a sample now and\nthen; we test every last cable we build, and if it doesn't pass specification,\nit doesn't leave the building. We enclose the test report -- not a generic\nreport for our cable, but a specific report for YOUR finished cable assembly\n-- in the bag with each cable we make. Read more Blue Jeans Cable: Your Source\nfor Professional Cable Assembly Blue Jeans Cable is a cable assembly shop in\nSeattle, Washington. Almost everything we sell is manufactured right here on\nour own premises by American workers, and in most cases, those workers have\nbeen with us for years and years -- we make a point of trying to make this the\nsort of place where employees want to stay for the long haul, and the result\nis a crew with great depth of experience and knowledge in a broad range of\nproducts and assembly techniques. We've been assembling Ethernet cables for\nover a decade, and we are known for distinctive products as well: our LC-1\nunbalanced audio cable and our ultrasonically-welded speaker cables, among\nothers.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e","published_at":"2021-08-09T23:19:57+10:00","created_at":"2021-08-09T23:19:57+10:00","vendor":"Blue Jeans Cable","type":"Cat 6 Cables","tags":["cocoon"],"price":13900,"price_min":13900,"price_max":13900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40775929987225,"title":"Blue \/ 6 foot","option1":"Blue","option2":"6 foot","option3":null,"sku":"B00IITTCMM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Blue, 6 Foot) Blue - Blue \/ 6 foot","public_title":"Blue \/ 6 foot","options":["Blue","6 foot"],"price":13900,"weight":10,"compare_at_price":null,"inventory_management":null,"barcode":"811887013485","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/soundstores.net\/cdn\/shop\/products\/B00IITTCMM.jpg?v=1650787810"],"featured_image":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITTCMM.jpg?v=1650787810","options":["Color","Size"],"media":[{"alt":null,"id":26791898644633,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITTCMM.jpg?v=1650787810"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITTCMM.jpg?v=1650787810","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eBJC Certified Cat 6A Patch Cable, Assembled in USA, with Test Report (Blue, 6 Foot)\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eBJC Cat 6A cable -- Certified Quality Performance Cat 6A\nseems like a simple affair -- four pairs of wire in a jacket. What's to mess\nup? It turns out that there's plenty. When we at Blue Jeans Cable first\nexamined the market for Cat 6A cables, we found that 80% of \"Cat 6A\" cables\nsold online and in brick-and-mortar stores failed to meet spec. Worse, about\nhalf of them didn't even meet the easier Cat 5e spec. In explaining this to\npeople, we encounter a fair bit of skepticism. Surely, people will say,\nthere's a spec, and surely all the cables are built to meet it. But, as they\nsay: \"Don't call me Shirley.\" It's not quite so simple. Features of BJC Cat 6A\nUses Belden's bonded-pair technology; pairs are joined, not merely twisted\ntogether Assembled in our shop in Seattle, WA Every cable is individually\ncertified on a certification tester and ships with its own test report 24 AWG\nsolid bare copper conductors Dissipative shield -- reduces alien crosstalk\nwithout the need for shielded plugs Read more Certification Testing: Why, and\nWhat does it Do? Cat 6A is not a construction spec, but a performance spec.\nThe object, in meeting spec, is to keep specific types of electrical loss and\ninterference within acceptable limits. For Ethernet patch cords, these are\nreturn loss (signal reflections caused principally by impedance instability)\nand crosstalk (signal from one pair interfering with signals on another).\nSince good materials can make bad cables, even a cable assembled from the good\nstuff isn't certain to pass spec; the only way to really tell is to run the\ncable on a properly configured \"certification tester,\" which sweeps a Cat 6A\ncable with frequencies up to 500 MHz and measures return loss and crosstalk\nall up and down the range. We use Fluke certification testers, and we use them\non EVERY individual cable -- if it doesn't pass, it doesn't ship. Read more\nQuality Cable: twist rates and cable lay As simple as four twisted pairs look,\nmore is going on than meets the eye. The characteristic impedance of the pairs\nis critical, and depends upon consistent insulation thickness and tightness of\ntwisting. And the twist rates on the four pairs must differ in ways that are\nsufficiently mathematically un-related that it doesn't encourage crosstalk.\nThis isn't your grandfather's telephone wire. Quality Connectors Most people\nlike to use one-piece connectors, and for ease of application, they're great.\nBut the performance characteristics of the one-piece connectors tend to be\nproblematic: you need better dimensional and positional control of the wire to\nminimize RL and crosstalk. We use a three-piece connector from Sentinel in\nYork, PA, which is fiddly to apply but provides excellent, reproducible\nperformance. Quality Assembly: end prep and termination Quality cable and\nquality connectors will do you no good without quality assembly practices. Too\nmuch un-twisting of wires, careless alignment and crimping, and other little\nmistakes will cause RL and crosstalk spikes. Even WITH excellent termination\nquality, the worst part of the assembly will always be at the ends; the job of\nan experienced assembler is to minimize the harm which connectorization\ninevitably does to the cable performance.l Certification of EVERY cable\nThere's only one way to really know a cable is spec-compliant, and that's to\nrun it on a costly certification tester, like the Fluke units we use at BJC.\nSome assemblers don't test their cables at all; some test a sample now and\nthen; we test every last cable we build, and if it doesn't pass specification,\nit doesn't leave the building. We enclose the test report -- not a generic\nreport for our cable, but a specific report for YOUR finished cable assembly\n-- in the bag with each cable we make. Read more Blue Jeans Cable: Your Source\nfor Professional Cable Assembly Blue Jeans Cable is a cable assembly shop in\nSeattle, Washington. Almost everything we sell is manufactured right here on\nour own premises by American workers, and in most cases, those workers have\nbeen with us for years and years -- we make a point of trying to make this the\nsort of place where employees want to stay for the long haul, and the result\nis a crew with great depth of experience and knowledge in a broad range of\nproducts and assembly techniques. We've been assembling Ethernet cables for\nover a decade, and we are known for distinctive products as well: our LC-1\nunbalanced audio cable and our ultrasonically-welded speaker cables, among\nothers.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e"}

{"id":7089238737049,"title":"BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC (Blue, 10 Foot) Blue","handle":"bjc-high-flex-3g-6g-hd-sdi-patch-cable-belden-1505f-bnc-to-bnc-blue-10-foot-blue","description":"\u003ch4\u003eBJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC (Blue, 10 Foot)\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eColor:Blue | Size:10 foot\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e","published_at":"2021-09-16T11:43:54+10:00","created_at":"2021-09-16T11:43:54+10:00","vendor":"Blue Jeans Cable","type":"Digital Coaxial Cables","tags":["cocoon"],"price":18600,"price_min":18600,"price_max":18600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41135482241177,"title":"Blue \/ 10 foot","option1":"Blue","option2":"10 foot","option3":null,"sku":"B00IITT3ZS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC (Blue, 10 Foot) Blue - Blue \/ 10 foot","public_title":"Blue \/ 10 foot","options":["Blue","10 foot"],"price":18600,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":"811887013645","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/soundstores.net\/cdn\/shop\/products\/B00IITT3ZS.jpg?v=1631798921"],"featured_image":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITT3ZS.jpg?v=1631798921","options":["Color","Size"],"media":[{"alt":null,"id":24396213485721,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITT3ZS.jpg?v=1631798921"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITT3ZS.jpg?v=1631798921","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eBJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC (Blue, 10 Foot)\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eColor:Blue | Size:10 foot\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e"}

{"id":7089241456793,"title":"BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC (Red, 10 Foot) Red","handle":"bjc-high-flex-3g-6g-hd-sdi-patch-cable-belden-1505f-bnc-to-bnc-red-10-foot-red","description":"\u003ch4\u003eBJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC (Red, 10 Foot)\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eColor:Red | Size:10 foot\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e","published_at":"2021-09-16T11:44:52+10:00","created_at":"2021-09-16T11:44:52+10:00","vendor":"Blue Jeans Cable","type":"F-Pin-Coaxial Tip","tags":["cocoon"],"price":20900,"price_min":20900,"price_max":20900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41135495676057,"title":"Red \/ 10 foot","option1":"Red","option2":"10 foot","option3":null,"sku":"B00IITT1K0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC (Red, 10 Foot) Red - Red \/ 10 foot","public_title":"Red \/ 10 foot","options":["Red","10 foot"],"price":20900,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":"811887013614","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/soundstores.net\/cdn\/shop\/products\/B00IITT1K0.jpg?v=1631798971"],"featured_image":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITT1K0.jpg?v=1631798971","options":["Color","Size"],"media":[{"alt":null,"id":24396223807641,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITT1K0.jpg?v=1631798971"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/B00IITT1K0.jpg?v=1631798971","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eBJC High-Flex 3G\/6G HD SDI Patch Cable (Belden 1505F), BNC to BNC (Red, 10 Foot)\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eColor:Red | Size:10 foot\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e"}