{"product_id":"current-to-voltage-module-aywhp-2-pieces-current-voltage-converter-module-0-4-20ma-to-0-3-3v-5v-10v-current-transformer-signal-conversion-board","title":"Current to Voltage Module AYWHP 2 Pieces Current Voltage Converter Module 0\/4-20mA to 0-3.3V 5V 10V Current Transformer Signal Conversion Board","description":"\u003ch3\u003eCurrent to Voltage Module AYWHP 2 Pieces Current Voltage Converter Module 0\/4-20mA to 0-3.3V 5V 10V Current Transformer Signal Conversion Board\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eDescription: This current transformer module is used to terminate the\ntransmission of a current signal and convert it into a voltage signal for\ndetection by microcontrollers. It can convert a common industrial 0-20mA or\n4-20mA current signal linearly into a 0-3.3V, 0-5V or 0-10V voltage output,\nwhich simplifies the reading of industrial sensors by microcontrollers (e.g.\nArduino, Raspberry Pi). The module converts a common industrial 0-20 mA or\n4-20 mA current signal linearly into a 0-3.3 V, 0-5 V or 0-10 V voltage output\nand thus simplifies the reading of industrial sensors by microcontrollers\n(e.g. Arduino, Raspberry Pi). The current transformer modules support a wide\nrange of voltage inputs (typically 7V-36V DC) and feature built-in adjustable\nzero point and range jumper configurations, making them suitable for a wide\nrange of field measurement and automation systems. Features: Wide supply\nvoltage range and output voltage support for multiple areas; Zero point and\nfinal value are self-adjustable; High stability, good linearity, industrial\nquality; The current signal sampling resistor is a high-precision colour ring\nresistor with high accuracy, low temperature drift and high performance.\nInstructions for use: 1. Module wired according to the definition of the\nsupply voltage 7-36 V (if the output is 10 V, the supply voltage must be\ngreater than 12 V). 2. After switching on, the D2 lamp should light up,\notherwise please check the cable connection. Circuit board with reverse\npolarity protection, reverse polarity connection does not burn. 3. 3. If the\ncurrent input is minimal (0 mA or 4 mA), adjust the Zero potentiometer so that\nthe VOUT output is minimal (0.0 V or another voltage). 4. If the current input\nis maximum (20 mA), adjust the voltage potentiometer so that the VOUT output\nis maximum (3.3 V or 5 V or 10 V, if the input is 4-20 mA, the output may be\nminimal to 2.5 V). Depending on your needs, the current transformer selects\nthe appropriate area via jumper caps: 4--20ma: 0--2.5V Range: J1 1 and 2 pins\nshort circuited, 3 and 4 pins short circuited. 0 - 3.3 V range: J1 1, 2 feet\ndisconnected, 3.4 feet disconnected. 0--5.0V range: J1 1.2 pins short\ncircuited, 3.4 pins short circuited. 0-10.0V range: J1 1, 2 pins short\ncircuited, 3, 4 pins disconnected. 0--20ma: 0--3.3V range: J1 1.2 pins short-\ncircuited, 3.4 pins short circuited. 0--5.0V range: J1 1.2 pins short-\ncircuited, 3.4 pins short circuited. 0--10.0V range: J1 1.2 pins short-\ncircuited, 3.4 pins disconnected. Product included: 2 x power to voltage\nmodule.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n  \u003cul class=\"a\"\u003e\n         \u003cli\u003eHigh precision: the current converter 24-bit ADC chip with low temperature drift resistance converts the 0\/4-20mA input signal into a 0-3.3V\/5V\/10V output, linearity up to 0.1% F.S.\u003c\/li\u003e\n         \u003cli\u003eWide power supply range: the operating voltage of the current converter module is usually DC 7V-36V, the usual 12V\/24V field power supply can be operated without additional power supply.\u003c\/li\u003e\n         \u003cli\u003eProtection design: aluminium alloy housing + epoxy resin casting, operating temperature -40 C ~ +85 C, suitable for moisture, dust, vibration and other harsh industrial environments.\u003c\/li\u003e\n         \u003cli\u003eReliable quality: the current signal sampling resistor adopts high-precision colour ring resistors with high precision, low temperature drift and excellent performance.\u003c\/li\u003e\n         \u003cli\u003eFree switching: One button to select the output range (0-3.3V\/5V\/10V) via dip switch, no external configuration required, directly compatible with Arduino, STM32, PLC analogue input modules, 5 minutes fast provision.\u003c\/li\u003e\n  \u003c\/ul\u003e","brand":"AYWHP","offers":[{"title":"Default Title","offer_id":45746955452569,"sku":"de-B0F7LG9X9F","price":109.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0491\/3148\/7385\/files\/de-B0F7LG9X9F.jpg?v=1775751190","url":"https:\/\/soundstores.net\/products\/current-to-voltage-module-aywhp-2-pieces-current-voltage-converter-module-0-4-20ma-to-0-3-3v-5v-10v-current-transformer-signal-conversion-board","provider":"SoundStore Australia","version":"1.0","type":"link"}