EIKS 4 Packs RGB 5050-Leds Light, Full Color RGB, Built-in IC WS2812B Adressable, DC 5V (Strip Shaped) Strip Shaped
EIKS 4 Packs RGB 5050-Leds Light, Full Color RGB, Built-in IC WS2812B Adressable, DC 5V (Strip Shaped)
Size:Strip Shaped WS2812B is a intelligent control LED light source that the control circuit and RGB chip are integrated in a package of 5050 components. It is widely use for Full-color module, Full color soft lights a lamp strip. Or LED decorative lighting, Indoor/outdoor LED video irregular screen.EIKS's RGB LED Pixel Ring with 256 brightness display and full 24-bit color display. Each LED can have its own color and brightness. You can control each LED individually and set it to any color or animation you want. Yes, that's right; this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). Parameter: Chip: WS2812B LED: 5050 package, RGB full color, high light Voltage: 5V Interface: VCC,GND,DIN,DOUT Pin Definition: - VCC: Power supply LED - GND: Ground - DIN: Control data signal input - DOUT: Control data signal output (only using it when in cascade mode, no need to use it in single ring) How to Use: - Step1: Prepare an 5V power supply and controller - Step2: Program the controller - Step3: Connect Power and Ground from Power Supply. AND Connect Ground and Control (data) wire to whatever you are driving the string with - ESP8266 or any controller. Package Included: - 4 x LED Light Strips Notes: - Brightness can be adjusted freely.Do not stare at it for a long time, otherwise you will be dazzled when the led Brightness is the brightest.
- [SIZE] RGB LED Pixel Strip, Strip's length measured 5.4cm and 1cm in width
- [PARAMETER] Working Voltage: 3.5V - 5.5V, with intelligent reverse connect protection; Power Consumption: 7.2W; Operating Temperature Range: -10C~+50C
- [FULL COLORFUL] 8Pcs 5050 highlight LED for each set which having RGB 256 level brightness adjustment, 160000 color image display effect, Sweep frequency not less than 400Hz/S.
- [INDIVIDUALLY ADDRESSABLE] Built-in WS2812B chip, equipped with one I/O interface which can control several LEDs, Can control each LED Pixel individually and set it to any color or animation you want.
- [DEVICE COMPLIANCE] Standard interface that can be controlled directly by microcontroller,such as Arduino , 8051, AVR