{"product_id":"electrocookie-raspberry-pi-5-case-aluminum-compact-case-with-m-2-nvme-ssd-pcie-hat-and-active-rgb-lighting-cooler-black-case-m-2-hatx1001","title":"ElectroCookie Raspberry Pi 5 Case, Aluminum Compact Case with M.2 NVMe SSD PCIe HAT and Active RGB Lighting Cooler (Black Case + M.2 HAT[X1001])","description":"\u003ch3\u003eElectroCookie Raspberry Pi 5 Case, Aluminum Compact Case with M.2 NVMe SSD PCIe HAT and Active RGB Lighting Cooler (Black Case + M.2 HAT[X1001])\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRaspberry Pi 5 NVMe SSD HAT – Compatibility Notice If your SSD is not\nrecognized or fails to boot with the Raspberry Pi 5, it is most likely due to\nincompatibility between the SSD and the Raspberry Pi 5. The HAT simply acts as\na signal and power bridge and does not affect SSD compatibility. SSD\ncontrollers known to cause issues include: SMI2263XT, SMI2263EN, MAP1202,\nPhison series controllers ★ Known Incompatible SSDs ★ The following SSDs have\nbeen reported to show compatibility issues with Raspberry Pi 5: Inland\nTN446Corsair MP600Micron 2450Kingston OM8SEP4256Q-A0WD Blue SN550 \/ SN580WD\nGreen SN350WD Black SN850 \/ SN770Kingspec seriesPNY CS1030 Lexar NM620 Lexar\nNM790 Transcend 110Q Kingston KC3000 Any other SSDs that use SMI2263XT,\nSMI2263EN, MAP1202, or Phison series controllers ★ Recommended SSDs (Confirmed\nCompatible) ★ The following SSDs are known for low power consumption and low\nheat generation, making them a great match for the Raspberry Pi 5’s hardware\nand power limits: Samsung PM9A1, PM981, PM991, PM991a, PM9B1SK hynix BC901,\nBC711Kioxia BG4, BG5 (2230 size)Official Raspberry Pi NVMe SSDAData Legend\n700AData Legend 800Crucial P2 M.2Crucial P3 M.2Crucial P3 Plus M.2Lexar\nNM710Kioxia ExceriaNetac NV2000Netac NV3000 ★ Tips for Stable Operation ★ Make\nsure your Raspberry Pi 5’s bootloader and OS are up to date.Before purchasing\nan SSD, we recommend searching online for “Pi Benchmarks” to check real-world\nperformance and compatibility reports. 🔧 How to Set Up SSD Boot on Raspberry\nPi 5 Using an M.2 HAT 📝 Note: SSD boot setup is the same as with the official\nM.2 HAT or other standard models. You can follow the official Raspberry Pi\ndocumentation, online tutorials, or simply refer to the step-by-step guide\nbelow. 1. Assemble your Raspberry Pi 5 board with the M.2 HAT and SSD. 2.\nInsert an SD card with Raspberry Pi OS into your Raspberry Pi 5, and power it\non. 3. Open the terminal and run the following commands one by one to update\nyour Raspberry Pi.: sudo apt update \u0026amp;\u0026amp; sudo apt full-upgrade sudo apt install\nrpi-eeprom sudo rpi-eeprom-update 4. Install Raspberry Pi Imager: sudo apt\ninstall rpi-imager 5. Launch Raspberry Pi Imager: rpi-imager 6. In the Imager:\n- Select Raspberry Pi 5 as your device - Choose the OS version - Select your\nSSD as the target drive, and start the installation. 7. After OS installation,\nrun the following to configure boot order: sudo raspi-config 8. Set boot\norder: Advanced Options → Boot Order → NVMe\/USB Boot Then press Finish or the\nEscape key. 9. Reboot your Raspberry Pi. It will now boot from the NVMe SSD 🎉\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n  \u003cul class=\"a\"\u003e\n         \u003cli\u003ePremium Aluminum Build : The high-quality aluminum body not only provides durability, but also adds a sleek, modern touch to your desk, wall, or workshop. (*Note: Not compatible with Raspberry Pi 4 due to different USB and Ethernet port placement.)\u003c\/li\u003e\n         \u003cli\u003eOptimized for Top-Mounted M.2 HAT Boards : Designed to support various M.2 HAT boards mounted above the Raspberry Pi 5 (*Note: Installation underneath is not supported due to the internal layout).\u003c\/li\u003e\n         \u003cli\u003eSSD Compatibility \u0026amp; Setup Info : Please check SSD compatibility in the product description or by searching Pi Benchmark online. Boot drive setup instructions are also provided in the product description below, or you can follow official Raspberry Pi documentation and online tutorials.\u003c\/li\u003e\n         \u003cli\u003eActive Cooling with Style : Equipped with an RGB-lit PWM fan that turns on with system power and automatically adjusts its speed based on CPU temperature (*Note: The lighting is not programmable, and the fan may not spin when the CPU is cool, or may run continuously if no OS or bootable drive is available to control it.).\u003c\/li\u003e\n         \u003cli\u003eWall-Mount Ready : Features cross-shaped holes on the back for easy wall installation, helping you save desk space and create a clean, floating Raspberry Pi setup.\u003c\/li\u003e\n         \u003cli\u003eEasy Access \u0026amp; Soft-Touch Power Button : The SD card slot, USB, Ethernet, Power, and Micro HDMI ports remain fully accessible, while the soft-click power button feels smooth and responsive.\u003c\/li\u003e\n  \u003c\/ul\u003e","brand":"ElectroCookie","offers":[{"title":"Default Title","offer_id":48937008791705,"sku":"B0DZ63TD3M","price":181.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0491\/3148\/7385\/files\/B0DZ63TD3M.jpg?v=1787735527","url":"https:\/\/soundstores.net\/products\/electrocookie-raspberry-pi-5-case-aluminum-compact-case-with-m-2-nvme-ssd-pcie-hat-and-active-rgb-lighting-cooler-black-case-m-2-hatx1001","provider":"SoundStore Australia","version":"1.0","type":"link"}