LEDwholesalers 12-Volt RGB Color-Changing Kit with Controller and IR Remote, Power Supply, and LED Strip with Water-Resistant Silicone-Gel Coating, 2038RGB-R2+3369+3208
LEDwholesalers 12-Volt RGB Color-Changing Kit with Controller and IR Remote, Power Supply, and LED Strip with Water-Resistant Silicone-Gel Coating, 2038RGB-R2+3369+3208
These LED color-changing flexible strips are great for nearly any application. Each kit comes with a 16.4 ft (5 meters) long LED light strip reel, controller with wireless IR remote, and the power supply. Everything needed to add great light to any location. Specifications (LED strip) LED Quantity/Type: 150x SMD5050 RGB Input Voltage: 12 VDC Power: 21.3 W Beam Angle: 120º Dimmable: Yes IP Rating: IP65 Pin Order: +RGB PCB Color: White Width: 10 mm Length: 16.4 ft (5 m) Wire Leads: 22 AWG Compliance: CE, RoHS Life Expectancy: 35,000 h Warranty: 1 year Wiring Unroll LED strip completely. Any exposed wires on the other end of the LED strip must not touch one another (or any metal object), creating a short. Connect the 4-pin connector of controller to that of the LED strip. Connect DC jack of power supply to controller. Remove the plastic seal in the battery compartment of the wireless remote. Double check that all connections are correct and secure, then plug in power cord. Note While the included controller can handle the power requirement of two such strips, the power supply only has the capacity to drive a single strip. Do not lengthen the LED strip by directly connecting an additional section to it. Test all components before permanent installation. Make sure that wires at the other end of the LED strip are not touching one another (or any metal object), which would create a short circuit. The LED strip is cuttable every 3 LEDs, approx. every 4", at the designated cut marks. Only the LED strip is waterproof; all other components and connections must be protected from getting wet.
- Complete kit includes: controller with wireless IR remote, power supply, and water-resistant silicone-gel coated LED strip
- Set static colors, adjust brightness, select various auto color-changing modes via wireless IR remote
- LED strip is cuttable every 3 LEDs, approx. every 4", at designated cut marks, to fit various length requirements
- Flexible - fits just about any space one can imagine
- Eco friendly - uses very little energy, without harmful radiations