Enter 5SOUND at Checkout for 5% OFF & Free Shipping Australia Wide

{"id":5997790396569,"title":"Adafruit NeoPixel Digital RGB LED Weatherproof Strip 60 LED-1m 1 Meter","handle":"adafruit-neopixel-digital-rgb-led-weatherproof-strip-60-led-1m-1-meter","description":"\u003ch4\u003eAdafruit NeoPixel Digital RGB LED Weatherproof Strip 60 LED-1m\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eSize:1 Meter You thought it couldn't get better than our world-famous 32-LED-\nper-meter Digital LED strip but we will prove you wrong! You wanted twice the\nLEDs? We got it (well, it's 1.875 times as many but that's within a margin of\nerror). You wanted thinner strips? Now only 12.5 mm wide, 10 mm if you remove\nthe strip from the casing. You wanted less noticeable strip color - this strip\nhas black-colored flex PCB, which will be less visible against black-painted\nwalls. This is the strip with black flex PCB, it's identical to the white 60\nLED\/meter except it has a different color mask on the flex strip.These LED\nstrips are even more fun and glowy. There are 60 RGB LEDs per meter, and you\ncan control each LED individually! Yes, that's right, this is the digitally-\naddressable type of LED strip. You can set the color of each LED's red, green\nand blue component with 8-bit PWM precision (so 24-bit color per pixel). The\nLEDs are controlled by shift-registers that are chained up down the strip so\nyou can shorten or lengthen the strip. Only 1 digital output pin are required\nto send data down. The PWM is built into each LED-chip so once you set the\ncolor you can stop talking to the strip and it will continue to PWM all the\nLEDs for you.The strip is made of flexible PCB material, and comes with a\nweatherproof sheathing. You can cut this stuff pretty easily with wire\ncutters, there are cut-lines every 0.65\"\/1.7cm (1 LED each). Solder to the\n0.1\" copper pads and you're good to go. Of course, you can also connect strips\ntogether to make them longer, just watch how much current you need! We have a\n5V\/2A supply that should be able to drive 1 meter (depending on use) and a\n5V\/10A supply that can drive up to 4 meters (depending on use) You must use a\n5V DC power supply to power these strips, do not use higher than 6V or you can\ndestroy the entire strip.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003cli\u003e60 NeoPixel Digital RGB LED per 1 Meter\u003c\/li\u003e\n \u003cli\u003eWeatherproof Strip\u003c\/li\u003e\n \u003cli\u003eSold as cut strip - May or may not include connectors (2 or 3-pin JST) if you get middle piece\u003c\/li\u003e\n \u003cli\u003eHigher density LEDS means much higher power usage over a certain distance - 18 Watts max (~3.5 Amps @ 5V) per meter instead of 9.6 Watts max (~2 Amps @ 5V). The max rating is assuming all the LEDs are on full white, usually the actual current for colorful design is about 1\/3 to 1\/2 the max current. A good power supply such as our 5V 10A supply is key!\u003c\/li\u003e\n \u003cli\u003eThird, just because you have all those pixels doesn't mean you have the RAM for it - the entire strip must be buffered in memory, and we've found many Arduino UNO projects only have about 1500 bytes of RAM available after all the extras are included - enough for about 500 LED pixels. If you want to drive the entire strip and have some other libraries included, use a Mega.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2020-12-08T16:26:20+11:00","created_at":"2020-12-08T16:26:20+11:00","vendor":"Adafruit Industries","type":"Rope Lights","tags":["m08"],"price":15300,"price_min":15300,"price_max":15300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37426846302361,"title":"1 Meter","option1":"1 Meter","option2":null,"option3":null,"sku":"B00R5CBOWY","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit NeoPixel Digital RGB LED Weatherproof Strip 60 LED-1m 1 Meter - 1 Meter","public_title":"1 Meter","options":["1 Meter"],"price":15300,"weight":82,"compare_at_price":null,"inventory_management":null,"barcode":"SG_B00R5CBOWY_US","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/soundstores.net\/cdn\/shop\/products\/B00R5CBOWY.jpg?v=1650367424","\/\/soundstores.net\/cdn\/shop\/products\/613TwxPoeTL.jpg?v=1622034593","\/\/soundstores.net\/cdn\/shop\/products\/61BXgUr9Q8L.jpg?v=1622034593","\/\/soundstores.net\/cdn\/shop\/products\/511z7fRJgKL.jpg?v=1622034593"],"featured_image":"\/\/soundstores.net\/cdn\/shop\/products\/B00R5CBOWY.jpg?v=1650367424","options":["Size"],"media":[{"alt":"[AUSTRALIA] - Adafruit NeoPixel Digital RGB LED Weatherproof Strip 60 LED-1m 1 Meter ","id":26757011669145,"position":1,"preview_image":{"aspect_ratio":1.057,"height":946,"width":1000,"src":"\/\/soundstores.net\/cdn\/shop\/products\/B00R5CBOWY.jpg?v=1650367424"},"aspect_ratio":1.057,"height":946,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/B00R5CBOWY.jpg?v=1650367424","width":1000},{"alt":"[AUSTRALIA] - Adafruit NeoPixel Digital RGB LED Weatherproof Strip 60 LED-1m 1 Meter ","id":16052537655449,"position":2,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/soundstores.net\/cdn\/shop\/products\/613TwxPoeTL.jpg?v=1622034593"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/613TwxPoeTL.jpg?v=1622034593","width":500},{"alt":"[AUSTRALIA] - Adafruit NeoPixel Digital RGB LED Weatherproof Strip 60 LED-1m 1 Meter ","id":16052537688217,"position":3,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/soundstores.net\/cdn\/shop\/products\/61BXgUr9Q8L.jpg?v=1622034593"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/61BXgUr9Q8L.jpg?v=1622034593","width":500},{"alt":"[AUSTRALIA] - Adafruit NeoPixel Digital RGB LED Weatherproof Strip 60 LED-1m 1 Meter ","id":16052537720985,"position":4,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/soundstores.net\/cdn\/shop\/products\/511z7fRJgKL.jpg?v=1622034593"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/511z7fRJgKL.jpg?v=1622034593","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eAdafruit NeoPixel Digital RGB LED Weatherproof Strip 60 LED-1m\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eSize:1 Meter You thought it couldn't get better than our world-famous 32-LED-\nper-meter Digital LED strip but we will prove you wrong! You wanted twice the\nLEDs? We got it (well, it's 1.875 times as many but that's within a margin of\nerror). You wanted thinner strips? Now only 12.5 mm wide, 10 mm if you remove\nthe strip from the casing. You wanted less noticeable strip color - this strip\nhas black-colored flex PCB, which will be less visible against black-painted\nwalls. This is the strip with black flex PCB, it's identical to the white 60\nLED\/meter except it has a different color mask on the flex strip.These LED\nstrips are even more fun and glowy. There are 60 RGB LEDs per meter, and you\ncan control each LED individually! Yes, that's right, this is the digitally-\naddressable type of LED strip. You can set the color of each LED's red, green\nand blue component with 8-bit PWM precision (so 24-bit color per pixel). The\nLEDs are controlled by shift-registers that are chained up down the strip so\nyou can shorten or lengthen the strip. Only 1 digital output pin are required\nto send data down. The PWM is built into each LED-chip so once you set the\ncolor you can stop talking to the strip and it will continue to PWM all the\nLEDs for you.The strip is made of flexible PCB material, and comes with a\nweatherproof sheathing. You can cut this stuff pretty easily with wire\ncutters, there are cut-lines every 0.65\"\/1.7cm (1 LED each). Solder to the\n0.1\" copper pads and you're good to go. Of course, you can also connect strips\ntogether to make them longer, just watch how much current you need! We have a\n5V\/2A supply that should be able to drive 1 meter (depending on use) and a\n5V\/10A supply that can drive up to 4 meters (depending on use) You must use a\n5V DC power supply to power these strips, do not use higher than 6V or you can\ndestroy the entire strip.\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003cli\u003e60 NeoPixel Digital RGB LED per 1 Meter\u003c\/li\u003e\n \u003cli\u003eWeatherproof Strip\u003c\/li\u003e\n \u003cli\u003eSold as cut strip - May or may not include connectors (2 or 3-pin JST) if you get middle piece\u003c\/li\u003e\n \u003cli\u003eHigher density LEDS means much higher power usage over a certain distance - 18 Watts max (~3.5 Amps @ 5V) per meter instead of 9.6 Watts max (~2 Amps @ 5V). The max rating is assuming all the LEDs are on full white, usually the actual current for colorful design is about 1\/3 to 1\/2 the max current. A good power supply such as our 5V 10A supply is key!\u003c\/li\u003e\n \u003cli\u003eThird, just because you have all those pixels doesn't mean you have the RAM for it - the entire strip must be buffered in memory, and we've found many Arduino UNO projects only have about 1500 bytes of RAM available after all the extras are included - enough for about 500 LED pixels. If you want to drive the entire strip and have some other libraries included, use a Mega.\u003c\/li\u003e\n \u003c\/ul\u003e"}
  1. Home
  2. Home & Kitchen:Seasonal Décor:Seasonal Lighting

Adafruit NeoPixel Digital RGB LED Weatherproof Strip 60 LED-1m 1 Meter

Previous Product | Next Product

In Stock. Leaves warehouse within 2 - 3 business days

$153.00 AUD
Maximum quantity available reached.
Enter 5SOUND at Checkout for 5% OFF & Free Shipping Australia Wide
More detailed product descriptions
Free Shipping Australia Wide
100% Safe & Secure Checkout
100 Days Return Policy *
1 Year Warranty *

Adafruit NeoPixel Digital RGB LED Weatherproof Strip 60 LED-1m

Size:1 Meter You thought it couldn't get better than our world-famous 32-LED- per-meter Digital LED strip but we will prove you wrong! You wanted twice the LEDs? We got it (well, it's 1.875 times as many but that's within a margin of error). You wanted thinner strips? Now only 12.5 mm wide, 10 mm if you remove the strip from the casing. You wanted less noticeable strip color - this strip has black-colored flex PCB, which will be less visible against black-painted walls. This is the strip with black flex PCB, it's identical to the white 60 LED/meter except it has a different color mask on the flex strip.These LED strips are even more fun and glowy. There are 60 RGB LEDs per meter, and you can control each LED individually! Yes, that's right, this is the digitally- addressable type of LED strip. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen the strip. Only 1 digital output pin are required to send data down. The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you.The strip is made of flexible PCB material, and comes with a weatherproof sheathing. You can cut this stuff pretty easily with wire cutters, there are cut-lines every 0.65"/1.7cm (1 LED each). Solder to the 0.1" copper pads and you're good to go. Of course, you can also connect strips together to make them longer, just watch how much current you need! We have a 5V/2A supply that should be able to drive 1 meter (depending on use) and a 5V/10A supply that can drive up to 4 meters (depending on use) You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip.

  • 60 NeoPixel Digital RGB LED per 1 Meter
  • Weatherproof Strip
  • Sold as cut strip - May or may not include connectors (2 or 3-pin JST) if you get middle piece
  • Higher density LEDS means much higher power usage over a certain distance - 18 Watts max (~3.5 Amps @ 5V) per meter instead of 9.6 Watts max (~2 Amps @ 5V). The max rating is assuming all the LEDs are on full white, usually the actual current for colorful design is about 1/3 to 1/2 the max current. A good power supply such as our 5V 10A supply is key!
  • Third, just because you have all those pixels doesn't mean you have the RAM for it - the entire strip must be buffered in memory, and we've found many Arduino UNO projects only have about 1500 bytes of RAM available after all the extras are included - enough for about 500 LED pixels. If you want to drive the entire strip and have some other libraries included, use a Mega.

Related Products