2 Kits Blue Led Special Effects Lights for Props and Scenery 12V Flashing Blinking Strobe
2 Kits Blue Led Special Effects Lights for Props and Scenery 12V Flashing Blinking Strobe
Each kit has a Micro Effects Dimmer Control (MED1) with 8 different lighting modes, a blue LED lamp, a 5 foot Typ. cable socket assembly (EEL1-1.5M-SBL2-B), and a 12 volt battery holder (BHC1-8AA-12V). The blue LED lamp operates from 12 volts DC at 100ma nominal current, light output of 25 lumens, the blue light uses 24 LEDs. The kit is operated from 8 AA batteries. The cable socket assembly can be press fit into a 7/16” hole drilled into rigid foam, wood or other material. The taper of the socket body locks it into place, and the socket has a front flange to limit the insertion depth and provide a finished appearance. The control button functions are: The Light button is used in static mode for dimming. Note the Static (0 mode) dimming function is between effects 8 and 1 when sequencing through the modes. The Speed (On/Off) button provides ten speed levels for the effects modes and is also used to turn the unit off when it is held longer than 3 seconds. The Mode button provides eight dynamic effects, and the Static (0 mode) between effects 8 and 1. The lighting effects modes are: 0) Static mode for dimming 1) Up / Down – ramp up on ramp down off – repeat 2) Up / Down – flame flicker – always on 3) Strobe – fast 4) Blinking – long off 5) Blinking – long on 6) Flash - burst of pulses (emergency vehicle light) 7) Strobe – slow (beacon light) 8) Up / Down varying brightness – brief off – repeat Blue LED light is a good accent to cool white LEDs for ice, snow and water scenery effects. Blue light also provides a good compliment and contrast to amber, orange, and red painted scenery. Applications: Special effects props Blue light water ripple and shimmer scenery ponds and pools (modes 2 and 8 are best for water effects). Theatrical scenery. Music stand lights (length of the assembly with the cable control and battery holder is about 7 feet; this allows the battery pack to be floor mounted when used for music stand lighting)
- Two blue LED lighting effects kits for prop and scenery projects. Kit includes 8 mode lighting effects control with dimmer function.
- LED bulb uses 24 LEDs with clear molded silicone covering. The cable socket has an overall nominal length of 5 feet to allow easy integration into prop and scenery projects. The overall length of the entire assembly, LED light, cable socket, control and battery holder is slightly less than 7 feet. Cable socket press fits into 7/16 (11mm) hole usable with prop building foam and wood.
- These kits are for prop and scenery building, themed entertainment projects, music stand lighting, and other unique projects needing a battery operated vivid blue LED specialty light.
- The MED1 (Micro Effects Dimmer) provides dynamic lighting effects that include strobing, flashing, blinking, and static dimming. The control retains its settings when powered off and back on.
- The kit is operated from 8 AA batteries, and runs for more than 12 hours on new alkaline batteries (not included).