ALITOVE 16.4ft WS2813 Upgraded WS2812B Individually Addressable Programmable RGB LED Strip 5m 150 LEDs Signal Break-point Continuous Transmission LED Pixels Lights Waterproof IP67 Black PCB 5V DC
ALITOVE 16.4ft WS2813 Upgraded WS2812B Individually Addressable Programmable RGB LED Strip 5m 150 LEDs Signal Break-point Continuous Transmission LED Pixels Lights Waterproof IP67 Black PCB 5V DC
Parameter: Model: AL-WS2813-150BK-WP Light source: 5050 RGB LED LED Qty: 30pcs per meter Wave length (NM): R,620~625nm ; G,515~525nm; B,465~475nm The gray level: 256 Color: full color (24-bit ) View angle:120° Voltage: DC 5V Power: 9W/M Waterproof: Waterproof IP67 Dimension: 5000124mm Package: 16.4ft/roll Life span:≥50000hrs Port scanning frequency reaches to 2KHz/s Data transmitting speed is up to 800Kbps RGB order: Green/Red/Blue Red wire: 5V+ / Black Wire: GDN / Yellow wire: Data / Green wire: Backup Data Kindly note: You must use a 5V DC power supply to power these strips, please NEVER use a power bank to power it. Do not use higher than 6V or you can destroy the entire strip.Power supply need to be selected according to the total power of LED Strip. We recommend to use 80% max power of power supply. We recommend ALITOVE 5V 10A or 15A power supply.It is better to inject power between each 5 meters when connect them in series in case of voltage drop. Led strip is made by 50cm FPCB, so there is a solder point each 50cm on strip. But this minor flaw has no any bad effect on the strip’s performance. In fact, most of the LED strips on the market are manufactured in half-meter lengths. Package: 1x 16.4ft 150 pixels WS2813 led strip (Power supply and controller are not included) 1x Female 4PIN JST connector 5x silicone clips 10x mini screws What is the advantage of WS2813 LED Strip? WS2813 LED strip is an upgraded version of WS2812B LED strip. It is also individually addressable LED like WS2812B. But it has two signal wires- data wire and backup data wire. Dual-signal wires version, signal break-point continuous transmission. Any pixel's failure won't affect signal transmission and total emitting effect. When one LED burns out, the other LEDs will keep working. So it is very suitable for large lighting project such as city skyline lighting, building outline decoration, HD advertising screen, shopping malls decoration etc. It will greatly reduce the maintenance cost of the project. Product Details Cut and weld freely Each LED is an independent and complete circuit cell. It can be cut and welded at the cutting line to meet your requirements. Flexible design The flexible FPCB plate is used as the substrate. So WS2813B LED strip can be gently bent and curved around surfaces. Chainable design There are 4pin JST connectors on both ends. The LED strips can be hooked up one by one without soldering. Waterproof IP67 Silicone waterproof sheathing covers the led strip. Waterproof grade reaches IP67. It can be used outdoor. Read more Pin Function 5V: Power Voltage, connect to “+5V” DO: Data signal output DI: Data signal input BO: Backup data signal output BI: Backup data signal input GND: Data &Power Grounding Read more Application Case Building Outline Automobile Decoration HD Advertising Screen Night Club Read more
- WS2813 LED strip is upgraded version of WS2812B. Dual-signal wires version, signal break-point continuous transmission. If one LED is damaged, the following LEDs can still work.
- Individually addressable. Each pixel can have its own color and brightness. You can control it individually and set them to any color or animation you want. 256 brightness display and 24-bit color display.
- Waterproof IP67. Silicone weatherproof sheathing covers the led strip, protects it very well and makes it easy to clean. It can be used outdoor.
- Easy to control. It can be programmed with K1000C, T1000S etc. It can also be controlled by SP105E SP108E pre-programmed app controllers and SP107E Colorful x2 sound activated music controllers.
- Easy installation. Comes with 4-pin JST SM connectors and separated power/ground wires on both ends, which makes it easy to hook up or wire up for power. It comes with silicone clips and screws. You can fix it on the wall or other surface easily.