BZONE RGB LED Controller 2-Port 4Pin Dual Output with 44 Keys IR Remote Control DC12V-24V for 5050 3528 RGB LED Strip Lights
BZONE RGB LED Controller 2-Port 4Pin Dual Output with 44 Keys IR Remote Control DC12V-24V for 5050 3528 RGB LED Strip Lights
Multiple light colors 20 static light colors, adjustable light color depth and adjustable light brightness, multiple light dynamic change modes, DIY mode, very high playability. 2 Connector 2 × 4Pin connection ports can connect two rolls of light belt at the same time to solve the requirement of decorative length. Application It can be used to connect SMD5050/3528 light strip, infrared remote control, enjoy the fun of wireless remote control of light strip. Read more Specification Voltage: DC12-24VCertification: CERemote control: 44 keysController connector: 2Control method: wireless Read more 44-Key Controller DIY function setting steps Step 1: turn on the lights. Press one of the RGB buttons. For example, press red button if you want to DIY red color.Step 2: Press the DIY1 button (the lights will change to white color for the first time).Step 3: Press and hold (at least 5 seconds) green and blue down arrow buttons, the lights will start changing. If you need lighter red color, press and hold the red up button, the longer you hold, the lighter red color you have. You can also press green and blue down, the changing will be more clearly.Step 4: Keep the color you just set by pressing the DIY1 button again.Step 5: Repeat the steps above to set the rest of five DIYs. Read more Tips If the buttons don't control the right colors, our controller can easily solve the problem.First, you can press the remote control switch button , turn off the light strip. Then press the "FADE7" button in the lower right corner, the light strip will flash. Then press the three keys R.G.B to adjust to the color you want and press the switch button to turn on the light strip, the buttons can control the correct color.If not, repeat the above steps until the button can control the correct color. There are 6 kinds of line sequence. Read more Package Including: 1 × 24Pin Connector LED Controller 1 × 44 Keys IR Remote Control 1 × Operation Instruction RGB LED Controller DC 12V 6A AC 100-240V to DC 12V 2A Power Adapter Supply Switching Transformer Charger DC5-28V Smart WiFi LED Controller 2-Port WiFi RGB LED Controller DC5-28V LED Strip Connector with 16.4FT Extension Cable
- 2-in-1 Function: The controller box has 2 4-pin ports, which can control 2 light strips at the same time.
- Mode: 20 lighting colors, 5 lighting modes: static/flash/strobe/gradient/RGB smooth change. 6 DIY buttons, you can freely adjust the R/G/B color. The brightness can be adjusted.
- Use: The controller is dedicated to 4-pin LED strips, the voltage is DC12-24V, the maximum current can pass 6A, you can use it with a 12V power supply. (Without light strip and power supply)
- Safety: The remote controller has been approved CE, RoHs, Fcc certification, Low voltage, Low heat, no radiation, it is safe and touchable.
- Tips:Suitable for 4-pin 5050 3528 2835 RGB strip lights, not suitable for 5-pin strip lights.