DealLED 16.4ft Black Strip Waterproof WS2811 LED Strip Addressable 2811 LED Pixel 12V RGB LED Stip Magic Dream Color Multicolors 300LED Single Strip
DealLED 16.4ft Black Strip Waterproof WS2811 LED Strip Addressable 2811 LED Pixel 12V RGB LED Stip Magic Dream Color Multicolors 300LED
Size:Single Strip Specifications: Model: SMD5050-WS2811-300LED-IP65 Color:Full color; RGB Dream Color / Multicolored Grey scale: 256/color IC Type: WS2811,20ICs/M, 100ICs/5M, each WS2811 IC control 3 LEDs Number of Lights: 300LEDs Beam Angle: 120 degree FPCB Strip Color: Black Strip Long: 5m or 16ft Strip Wide: 10mm Operating Temperature: -20~+45 degree Voltage Required: DC12V Wattage Required: 60W/5m; 0.2W/LED Strip Back: Sticky; suggest to add fixing it by clips. Type: Indoor/Outdoor Rating: Waterproof IP65 glue sealed. Protected from light water jets. Don't soak it in water. Installing Tips: 1. External IC WS2811. One IC controls over three LEDs, which forms a circuit. One damaged circuit won’t make the other malfunction. You can cut by the sissors line on the board to DIY per your need. 2. There are two bare wire leads reaching out on both ends, one is positive and the other is negative. They are for the extra power supply in parralle connection when you want to connect more than one strip. 3. You will need an extra power adapter (Min.60W;DC12V for 1 roll of 5m/16ft strip) and an extra special remote controller (Min.60W;DC12V) to function the led strip. The listed item is strip only. Application: LED whips; Ideal for party, wedding, festival, holiday, Xmas, Halloween, light sculpture, decorative figure, active signs, displays, shop windows, and storefronts, bar, nightclub, street, sidewalk, deck, park, porch, staircase, railing, ceiling, or driveway.
- Programmable dream color WS2811 LED strip; full color RGB; 60LEDs/M, 3LED per cell with one WS2811 IC, every 3LEDs cuttable; 20pixels/m, 5meters/roll
- External IC WS2811. One IC controls over three LEDs, which forms a circuit. One damaged circuit wont make the other malfunction. You can cut by the sissors line on the board to DIY per your need.
- Waterproof IP65 glue sealed. Protected from light water jets. Don't soak it in water.
- Flexible rope for curving around bends. Easy installation with adhesive tape on its back. The LED strip is with two 3PIN connectors on both ends. You can connect two strips without soldering
- Kindly Note: 1) The package does not contain any power supply and controller. 2) The work voltage of the LED string must be 12V DC. Otherwise, it will be burnt out.