JOYLIT WS2812B Individually Addressable RGB LED Strip Light 16.4ft 300 Pixels 5050 SMD, DC 5V Digital Programmable Dreamcolor Chasing Tape Light Compatible with Arduino, Raspberry Pi ( Black PCB ) IP33-300LEDs/16.4ft
JOYLIT WS2812B Individually Addressable RGB LED Strip Light 16.4ft 300 Pixels 5050 SMD, DC 5V Digital Programmable Dreamcolor Chasing Tape Light Compatible with Arduino, Raspberry Pi ( Black PCB )
Size:IP33-300LEDs/16.4ft >>>Parameter Model: WS2812B 300 pixels LED strip Light source: 5050 LED Led Qty: 60pcs per meter (300LEDs/5m) Wave length (NM): R/650nm; G/520nm; B/460nm IC Model: WS2812B IC Gray level: 256 Color: full color 24-bit View angle: 120 degrees Work Voltage: DC 5V Power: 0.2W/LED Waterproof: Not waterproof IP20 FPCB board color: Black Dimension: 5000103mm Life span: 50000hrs >>>Kindly note: 1. Because the Load current is large (Maximum current <12A), please use the load wire(Red wire: Positive + ; White wire: Negative - ) to run the LED strip, Do not use the controller to directly load the LED strip lights. 2. If possible, the head and tail of the LED strip are connected to the power supply for better light color effect. 3.You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip. 4. Led strip is made by 50cm FPCB, so there is a solder point each 50cm on strip. But this minor flaw has no any bad effect on the strip¡¯s performance. In fact, most of the LED strips on the market are manufactured in half-meter lengths. >>>Package: 1x 16.4ft 300 pixels WS2812B led strip Not included Power supply
- [Compatible with kinds of controllers]: The addressable IC support each pixel can have its own color and brightness as your wish. Compatible with Arduino, Raspberry Pi, Teensy, T1000S,K1000C etc programmable controllers. Support SP110E SP105E SP108E SP110E etc APP controllers, CSY07 CSY08 X2 SP106E SP107E etc music controllers, SP501E etc smart WiFi Alexa Controllers. Power adapter is not included
- [5V LED Strip Light]: Do not try DC12V or DC24V power supply.Match use controller can appear colorful curtain-up/ flow water/raindrop/jump flash and so on hundreds of lighting effect, you can also edit animation effect by Coreldraw/Flash/LedEdit software.Power adapter and controller need to be purchased separately
- [Each LED cuttable]: It comes with 3pin JST-SM connectors and separated power/ground wires on both ends. Each LED can be cut off without damaging the rest strip. You can shorten, lengthen or bend it freely if you want
- [Widely Application]: Making led screen, led wall, advertising board, apply to hotel, KTV, bars, Outdoor advertising signs, Festivel Christmas or wedding party decoration,home improvement lights such as bedroom living room ceiling wall lights, garden deck yard patio decorate lights etc