S NMT 6.56ft Smart LED RGBCCT LED Strip Light Set Works with Hue Bridge,Lightify Hub and Amazon Echo Plus for APP/Voice Control ZigBee Mini Controller +5V LED Light Strip +3 Connector Not Waterproof
S NMT 6.56ft Smart LED RGBCCT LED Strip Light Set Works with Hue Bridge,Lightify Hub and Amazon Echo Plus for APP/Voice Control ZigBee Mini Controller +5V LED Light Strip +3 Connector Not Waterproof
6.56ft Intelligent LED ZigBee RGBCCT LED Strip Light Set Wireless Smart Phone APP Control Voice Control USB Interface Mini Controller +5V 2m LED Light Strip +3 Connector Not Waterproof This Gateways/hubs Gledoptp zigbee mini controller can compatible with multiple international gateways. It work with HUE, Amazon echo plus, SmartThings, Osram lightify and Homee etc directly. Via Hue gateway, we can implement app control, voice control, remote control the light strip. The mini 2.4G wireless RGB+CCT led controller has the DC5V USB port. That means computer port, TV port, and mobile phone charger can be used as power supplies. So it is easy to use and reduce the cost of additional power purchases. There are three L shape connectors in this set. The light strip can be cutted along the cutting line. So we can diy the shape of light strip as we need. After installation, the led strip light can be adjusted the brightness from 0%-100% and adjusted the color temperature from 2700K-6500K. Read more Signal mode :ZIGBEE Size: 11x22x43mm Input Voltage: DC 5V Output Current/Channel:2A max Total Output Current:2A max Length:6.56ft (2 meter) LED Type: SMD5050+2835 LEDs/meter:90LEDs/m CCT:2700K,6500K,Red,Green,Blue Waterproof Rate OptionIP20 Quantity:3 pcs Application:connect two light strips Interface:6 pin Cut the LED srtip light along the cutting lineInsert the cut LED stip light into the connector Installation of this strip light kit Step 1:Turn off the power Step 2:Connect the led strip light and mini connector Step 3:Cut the strip light along the line according your need, and connect it by L shape connector Step 4:Stick the strip light to the surface that has been wiped clean Step 5:Connect the controller to the power supply Step 6:Connect the controller with the gateway Connection with Gateway 1.Connect the LED strip light to the controller see section"wire connection" 2.Start the device searching on the Zigbee Light Link Gateway,it could like take some time. If the Gateway does not find the device, plug power off/on or make a reset. 3.After finding the device, the light will turn green,tehn you can save it to the rooms/groups. 4.Now you can use the device.
- [Powered by USB port ] The mini 2.4G wireless RGB+CCT led controller has the DC5V USB port. That means computer port, TV port, and mobile phone charger can be used as power supplies. So it is easy to use and reduce the cost of additional power purchases.
- [Feel free to customize the shape of led strip] There are three L shape connectors in this set. The light strip can be cutted along the cutting line. So we can diy the shape of light strip as we need.
- [Adjustable color temperature and brightness] Adjust the color temperature from 2700~6500K and brightness from 0%~100% ,make the light you want.