ANP PUAUTO Amp Subwoofer Amplifier Wire Harness Adapter Interface for Toyota Tacoma Tundra Sienna Camry RAV4 Avalon Corolla Radio System
ANP PUAUTO Amp Subwoofer Amplifier Wire Harness Adapter Interface for Toyota Tacoma Tundra Sienna Camry RAV4 Avalon Corolla Radio System
Fit for Toyota models 2019 Toyota Avalon 2019 Toyota C-HR 2020 Toyota Tacoma 2020 Toyota 4Runner 2018-2020 Toyota Sienna 2018-2019 Toyota Mirai 2019-2020 Toyota RAV4 2019-2020 Toyota Corolla Hatchback 2020 Toyota Prius L, LE, XLE 2020 Toyota Prius Prime XLE 2017-2019 Toyota Prius Prime Premium 2018-2020 Toyota Camry (w/ 7and 8-inch touchscreen radio) 2020 Toyota Tundra (w/ black or silver sides high glosscolor dash) 2020 Toyota Sequoia (w/ matte black color dash) 2020 Toyota Sequoia (w/ black high gloss color dash) 2020 Toyota Sequoia (w/ charcoal high gloss color dash) Package Include: 1unit wire harness as the picture shows Installation Instructions: 1. After finished all the connections, keep turning the adjustment pots down by rotating them completely counter-clockwise. 2. Turn the stereo system on and adjust the main volume control on the stereo to approximately 3/4 of the maximum volume. 3. Select one of the adjustment pots and turn it slowly clockwise until notice the audio distortion then stop. 4. Turn the remaining pot to the same position as the previously adjusted pot. 5. Audio volume to the amplifier can be adjusted by the dials on the harness. 6. After installation, "bass level" only can be controlled by the EQ on the radio.
Product Features
- Compatible with Toyota Camry 2018-2020, Corolla Hatchback 2019-2020, RAV4 2019-2020, Sienna 2018-2020, Mirai 2018-2020, Avalon 2019-2020,C-HR 2019-2020, Tundra 2020,Tacoma 2020,4Runner 2020, Corolla 2020, Prius 2020, Sequoia 2020
- Only works with factory non-amplified systems (base radio), will not work with factory amplified stereo systems
- [Customer Service] : 1 x Amp amplifier adapter harness, if you need help, please contact us by email immediately, and we will reply as soon as possible within 12 hours.
- [Function] : This harness allows for the installation of an aftermarket amp for the addition of a subwoofer to your factory system. The harness provides a connection for one set of RCA cables to provide an audio signal to an external amplifier.
- [Easy to install ] : Plug and play. Unplug the OEM factory harness and insert this amplifier harness in the middle between the radio and the OEM harness.Then connect the RCA cable to the white and red slots.