{"id":5982059528345,"title":"Taidacent AD835 4-Quadrant Analog Multiplier Module Voltage Output Signal Conditioning Phase Detection Measurement Four Quadrant Multiplier Mixing","handle":"taidacent-ad835-4-quadrant-analog-multiplier-module-voltage-output-signal-conditioning-phase-detection-measurement-four-quadrant-multiplier-mixing","description":"\u003ch4\u003eTaidacent AD835 4-Quadrant Analog Multiplier Module Voltage Output Signal Conditioning Phase Detection Measurement Four Quadrant Multiplier Mixing\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eParameter Name AD835 multiplier Power supply ±5V Size 41cm\n 39cm Features A more refined size, a more reasonable and beautiful PCB\nlayout, and a 2mm X 2mm shield cover for the module to isolate some large\nsignal interference. Chip Description The AD835 is a complete four-quadrant,\nvoltage output analog multiplier, fabricated on an advanced dielectrically\nisolated complementary bipolar process. It generates the linear product of its\nX and Y voltage inputs with a −3 dB output bandwidth of 250 MHz (a small\nsignal rise time of 1 ns). Full-scale (−1 V to +1 V) rise to fall times are\n2.5 ns (with a standard RL of 150 Ω), and the settling time to 0.1% under the\nsame conditions is typically 20 ns. Its differential multiplication inputs (X,\nY) and its summing input (Z) are at high impedance. The low impedance output\nvoltage (W) can provide up to ±2.5 V and drive loads as low as 25 Ω. Normal\noperation is from ±5 V supplies. Though providing state-of-the-art speed, the\nAD835 is simple to use and versatile. For example, as well as permitting the\naddition of a signal at the output, the Z input provides the means to operate\nthe AD835 with voltage gains up to about ×10. In this capacity, the very low\nproduct noise of this multiplier (50 nV\/√Hz) makes it much more useful than\nearlier products. The AD835 is available in an 8-lead PDIP package (N) and an\n8-lead SOIC package (R) and is specified to opera Interface Chip Highlights\nThe AD835 is the first monolithic 250 MHz, four-quadrant voltage output\nmultiplier. Minimal external components are required to apply the AD835 to a\nvariety of signal processing applications. High input impedances (100 kΩ||2\npF) make signal source loading negligible. High output current capability\nallows low impedance loads to be driven. State-of-the-art noise levels\nachieved through careful device optimization and the use of a special low\nnoise, band gap voltage reference.Designed to be easy to use and cost\neffective in applications that require the use of hybrid or board-level\nsolutions. Feature Requires very few external components DC-coupled voltage\noutput simplifies applications The basic function is W = XY+ Z High\ndifferential input impedance X, Y and Z input Low multiplier noise 50 nV\/vHz\n0.1% of full scale settling time is only 20 ns Frequency multiplication Chip\napplication High-speed multiplication, division, and squaring operations\nBroadband modulation and demodulation Phase detection and measurement Sine\nwave frequency doubled Video gain control and keying Voltage controlled\namplifiers and filters Modulation Modulation one Modulation Two Modulation\nThree Read more\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003cli\u003eName: AD835 Multiplier Size: 41mm X 39mm Supply voltage range: 5v\u003c\/li\u003e\n \u003cli\u003e1. The AD835 is the first single-chip 250 MHz four-quadrant voltage output multiplier. 2. The AD835 is suitable for a variety of signal processing applications with very few external components. 3. High input impedance (100 k2112 pF) makes the source load negligible. 4. High output current capability supports driving low impedance loads.\u003c\/li\u003e\n \u003cli\u003eThe AD835 is a complete four-quadrant voltage output analog multiplier fabricated using advanced dielectric isolation and bipolarity. It produces a linear product of the X and Y voltage inputs with a 3dB output bandwidth of 250 MHz (a small signal rise time of 1 ns).\u003c\/li\u003e\n \u003cli\u003eChip features 1. Simple: The basic function is W=XY+z 2. Complete: Only minimal external components 3. DC-coupled voltage output to simplify the application 4. High speed: 0.1% of full scale setup time is only 20 ns 5. High differential input impedance X, Y, and Z inputs 6. Low multiplier noise 50 nV\/vHz\u003c\/li\u003e\n \u003cli\u003eChip application High speed multiplication, division, square operations Broadband modulation and demodulation Phase detection and measurement Double sine wave frequency Video gain control and keying Voltage Control Amplifiers and Filters\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2020-12-02T16:30:06+11:00","created_at":"2020-12-02T16:30:06+11:00","vendor":"Taidacent","type":"Power Amplifiers","tags":["m02"],"price":17600,"price_min":17600,"price_max":17600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37368501141657,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07DGGMZLV","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taidacent AD835 4-Quadrant Analog Multiplier Module Voltage Output Signal Conditioning Phase Detection Measurement Four Quadrant Multiplier Mixing","public_title":null,"options":["Default Title"],"price":17600,"weight":23,"compare_at_price":null,"inventory_management":null,"barcode":"6440267893825","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/soundstores.net\/cdn\/shop\/products\/B07DGGMZLV.jpg?v=1650327770","\/\/soundstores.net\/cdn\/shop\/products\/712wGfxaQDL.jpg?v=1622003392","\/\/soundstores.net\/cdn\/shop\/products\/7120xWU7GrL.jpg?v=1622003392"],"featured_image":"\/\/soundstores.net\/cdn\/shop\/products\/B07DGGMZLV.jpg?v=1650327770","options":["Title"],"media":[{"alt":"[AUSTRALIA] - Taidacent AD835 4-Quadrant Analog Multiplier Module Voltage Output Signal Conditioning Phase Detection Measurement Four Quadrant Multiplier Mixing ","id":26754728329369,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/soundstores.net\/cdn\/shop\/products\/B07DGGMZLV.jpg?v=1650327770"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/B07DGGMZLV.jpg?v=1650327770","width":1000},{"alt":"[AUSTRALIA] - Taidacent AD835 4-Quadrant Analog Multiplier Module Voltage Output Signal Conditioning Phase Detection Measurement Four Quadrant Multiplier Mixing ","id":15685964103833,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1800,"width":1800,"src":"\/\/soundstores.net\/cdn\/shop\/products\/712wGfxaQDL.jpg?v=1622003392"},"aspect_ratio":1.0,"height":1800,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/712wGfxaQDL.jpg?v=1622003392","width":1800},{"alt":"[AUSTRALIA] - Taidacent AD835 4-Quadrant Analog Multiplier Module Voltage Output Signal Conditioning Phase Detection Measurement Four Quadrant Multiplier Mixing ","id":15685964136601,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1800,"width":1800,"src":"\/\/soundstores.net\/cdn\/shop\/products\/7120xWU7GrL.jpg?v=1622003392"},"aspect_ratio":1.0,"height":1800,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/7120xWU7GrL.jpg?v=1622003392","width":1800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eTaidacent AD835 4-Quadrant Analog Multiplier Module Voltage Output Signal Conditioning Phase Detection Measurement Four Quadrant Multiplier Mixing\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eParameter Name AD835 multiplier Power supply ±5V Size 41cm\n 39cm Features A more refined size, a more reasonable and beautiful PCB\nlayout, and a 2mm X 2mm shield cover for the module to isolate some large\nsignal interference. Chip Description The AD835 is a complete four-quadrant,\nvoltage output analog multiplier, fabricated on an advanced dielectrically\nisolated complementary bipolar process. It generates the linear product of its\nX and Y voltage inputs with a −3 dB output bandwidth of 250 MHz (a small\nsignal rise time of 1 ns). Full-scale (−1 V to +1 V) rise to fall times are\n2.5 ns (with a standard RL of 150 Ω), and the settling time to 0.1% under the\nsame conditions is typically 20 ns. Its differential multiplication inputs (X,\nY) and its summing input (Z) are at high impedance. The low impedance output\nvoltage (W) can provide up to ±2.5 V and drive loads as low as 25 Ω. Normal\noperation is from ±5 V supplies. Though providing state-of-the-art speed, the\nAD835 is simple to use and versatile. For example, as well as permitting the\naddition of a signal at the output, the Z input provides the means to operate\nthe AD835 with voltage gains up to about ×10. In this capacity, the very low\nproduct noise of this multiplier (50 nV\/√Hz) makes it much more useful than\nearlier products. The AD835 is available in an 8-lead PDIP package (N) and an\n8-lead SOIC package (R) and is specified to opera Interface Chip Highlights\nThe AD835 is the first monolithic 250 MHz, four-quadrant voltage output\nmultiplier. Minimal external components are required to apply the AD835 to a\nvariety of signal processing applications. High input impedances (100 kΩ||2\npF) make signal source loading negligible. High output current capability\nallows low impedance loads to be driven. State-of-the-art noise levels\nachieved through careful device optimization and the use of a special low\nnoise, band gap voltage reference.Designed to be easy to use and cost\neffective in applications that require the use of hybrid or board-level\nsolutions. Feature Requires very few external components DC-coupled voltage\noutput simplifies applications The basic function is W = XY+ Z High\ndifferential input impedance X, Y and Z input Low multiplier noise 50 nV\/vHz\n0.1% of full scale settling time is only 20 ns Frequency multiplication Chip\napplication High-speed multiplication, division, and squaring operations\nBroadband modulation and demodulation Phase detection and measurement Sine\nwave frequency doubled Video gain control and keying Voltage controlled\namplifiers and filters Modulation Modulation one Modulation Two Modulation\nThree Read more\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003cli\u003eName: AD835 Multiplier Size: 41mm X 39mm Supply voltage range: 5v\u003c\/li\u003e\n \u003cli\u003e1. The AD835 is the first single-chip 250 MHz four-quadrant voltage output multiplier. 2. The AD835 is suitable for a variety of signal processing applications with very few external components. 3. High input impedance (100 k2112 pF) makes the source load negligible. 4. High output current capability supports driving low impedance loads.\u003c\/li\u003e\n \u003cli\u003eThe AD835 is a complete four-quadrant voltage output analog multiplier fabricated using advanced dielectric isolation and bipolarity. It produces a linear product of the X and Y voltage inputs with a 3dB output bandwidth of 250 MHz (a small signal rise time of 1 ns).\u003c\/li\u003e\n \u003cli\u003eChip features 1. Simple: The basic function is W=XY+z 2. Complete: Only minimal external components 3. DC-coupled voltage output to simplify the application 4. High speed: 0.1% of full scale setup time is only 20 ns 5. High differential input impedance X, Y, and Z inputs 6. Low multiplier noise 50 nV\/vHz\u003c\/li\u003e\n \u003cli\u003eChip application High speed multiplication, division, square operations Broadband modulation and demodulation Phase detection and measurement Double sine wave frequency Video gain control and keying Voltage Control Amplifiers and Filters\u003c\/li\u003e\n \u003c\/ul\u003e"}
Taidacent AD835 4-Quadrant Analog Multiplier Module Voltage Output Signal Conditioning Phase Detection Measurement Four Quadrant Multiplier Mixing
![[AUSTRALIA] - Taidacent AD835 4-Quadrant Analog Multiplier Module Voltage Output Signal Conditioning Phase Detection Measurement Four Quadrant Multiplier Mixing](http://soundstores.net/cdn/shop/products/B07DGGMZLV_1400x.jpg?v=1650327770)
![[AUSTRALIA] - Taidacent AD835 4-Quadrant Analog Multiplier Module Voltage Output Signal Conditioning Phase Detection Measurement Four Quadrant Multiplier Mixing](http://soundstores.net/cdn/shop/products/712wGfxaQDL_1400x.jpg?v=1622003392)
![[AUSTRALIA] - Taidacent AD835 4-Quadrant Analog Multiplier Module Voltage Output Signal Conditioning Phase Detection Measurement Four Quadrant Multiplier Mixing](http://soundstores.net/cdn/shop/products/7120xWU7GrL_1400x.jpg?v=1622003392)
Taidacent AD835 4-Quadrant Analog Multiplier Module Voltage Output Signal Conditioning Phase Detection Measurement Four Quadrant Multiplier Mixing
Parameter Name AD835 multiplier Power supply ±5V Size 41cm 39cm Features A more refined size, a more reasonable and beautiful PCB layout, and a 2mm X 2mm shield cover for the module to isolate some large signal interference. Chip Description The AD835 is a complete four-quadrant, voltage output analog multiplier, fabricated on an advanced dielectrically isolated complementary bipolar process. It generates the linear product of its X and Y voltage inputs with a −3 dB output bandwidth of 250 MHz (a small signal rise time of 1 ns). Full-scale (−1 V to +1 V) rise to fall times are 2.5 ns (with a standard RL of 150 Ω), and the settling time to 0.1% under the same conditions is typically 20 ns. Its differential multiplication inputs (X, Y) and its summing input (Z) are at high impedance. The low impedance output voltage (W) can provide up to ±2.5 V and drive loads as low as 25 Ω. Normal operation is from ±5 V supplies. Though providing state-of-the-art speed, the AD835 is simple to use and versatile. For example, as well as permitting the addition of a signal at the output, the Z input provides the means to operate the AD835 with voltage gains up to about ×10. In this capacity, the very low product noise of this multiplier (50 nV/√Hz) makes it much more useful than earlier products. The AD835 is available in an 8-lead PDIP package (N) and an 8-lead SOIC package (R) and is specified to opera Interface Chip Highlights The AD835 is the first monolithic 250 MHz, four-quadrant voltage output multiplier. Minimal external components are required to apply the AD835 to a variety of signal processing applications. High input impedances (100 kΩ||2 pF) make signal source loading negligible. High output current capability allows low impedance loads to be driven. State-of-the-art noise levels achieved through careful device optimization and the use of a special low noise, band gap voltage reference.Designed to be easy to use and cost effective in applications that require the use of hybrid or board-level solutions. Feature Requires very few external components DC-coupled voltage output simplifies applications The basic function is W = XY+ Z High differential input impedance X, Y and Z input Low multiplier noise 50 nV/vHz 0.1% of full scale settling time is only 20 ns Frequency multiplication Chip application High-speed multiplication, division, and squaring operations Broadband modulation and demodulation Phase detection and measurement Sine wave frequency doubled Video gain control and keying Voltage controlled amplifiers and filters Modulation Modulation one Modulation Two Modulation Three Read more
- Name: AD835 Multiplier Size: 41mm X 39mm Supply voltage range: 5v
- 1. The AD835 is the first single-chip 250 MHz four-quadrant voltage output multiplier. 2. The AD835 is suitable for a variety of signal processing applications with very few external components. 3. High input impedance (100 k2112 pF) makes the source load negligible. 4. High output current capability supports driving low impedance loads.
- The AD835 is a complete four-quadrant voltage output analog multiplier fabricated using advanced dielectric isolation and bipolarity. It produces a linear product of the X and Y voltage inputs with a 3dB output bandwidth of 250 MHz (a small signal rise time of 1 ns).
- Chip features 1. Simple: The basic function is W=XY+z 2. Complete: Only minimal external components 3. DC-coupled voltage output to simplify the application 4. High speed: 0.1% of full scale setup time is only 20 ns 5. High differential input impedance X, Y, and Z inputs 6. Low multiplier noise 50 nV/vHz
- Chip application High speed multiplication, division, square operations Broadband modulation and demodulation Phase detection and measurement Double sine wave frequency Video gain control and keying Voltage Control Amplifiers and Filters
Related Products
![[AUSTRALIA] - Taidacent INA114 Instrumentation Amplifier 1000x Gain Adjustable Single-Supply Operation Single-Ended/Differential Input](http://soundstores.net/cdn/shop/products/B07CXXRHY9_800x.jpg?v=1650330960)
Taidacent INA114 Instrumentation...
$186.00 AUD
{"id":5982271766681,"title":"Taidacent INA114 Instrumentation Amplifier 1000x Gain Adjustable Single-Supply Operation Single-Ended\/Differential Input","handle":"taidacent-ina114-instrumentation-amplifier-1000x-gain-adjustable-single-supply-operation-single-ended-differential-input","description":"\u003ch4\u003eTaidacent INA114 Instrumentation Amplifier 1000x Gain Adjustable Single-Supply Operation Single-Ended\/Differential Input\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eOview The module is exquisite and compact, and has\nexcellent amplification performance. The amplification of small signals can be\ngreater than 1000 times, the detection of weak signals is good, the single\npower supply is very convenient, and the onboard 5V fixed output voltage.\nParameter Module name INA114 instrument program-controlled amplifier Module\npower supply 6V-24V can be used, but it depends on the voltage output of the\nmodule Module size 50mm X 50mm Module bandwidth INA114 is lower than 100KHz\nunder high gain Module input signal type single-ended signal or differential\nsignal Maximum module magnification greater than 2000 times (measured), due to\nthe large gain, the waveform has large fluctuations in the band. It is\nrecommended to use multi-stage amplification for high gain Fixed output\nvoltage 5V-10V (default delivery 5V) Pin description Feature INA114 is a low-\ncost, high-precision instrumentation amplifier that only needs an external\nresistor to set the gain, and the gain range is 1 to 10000. This module can be\nmagnified 1000 times, the circuit layout is regular, MINI, the design layout\nis reasonable, the materials are generous, and it is suitable for project\ndevelopment and student competitions. Module chip INA1 14 is a low-cost,\ngeneral-purpose instrumentation amplifier that provides excellent accuracy.\nIts multifunctional 3-op amplifier design and small size make it an ideal\nchoice for a wide range of applications. An external resistor can set any gain\nfrom 1 to 1000. The internal input protection can withstand up to ±40V without\ndamage. The laser processed INA1 14 has extremely low offset voltage (504V),\nextremely low drift (0.25μV\/°C) and high common mode rejection (115dB when G =\n1000). It can be powered by a minimum of ±2.25V, and can be powered by battery\nand 5V single power supply. The minimum quiescent current is 3mA. INA1 14\nadopts 8-pin plastic and SOL-16 surface mount package. Both have the\ncharacteristics of a temperature range of -40°C to 85C. Chip characteristics\nLow offset voltage: 50 uV max Low drift: 0.25μV1°C max Low input bias current:\n2nA max High common mode rejection: 115dB minimum Input overvoltage\nprotection: ±40V Wide power supply voltage range: +2.25V~+18V Low quiescent\ncurrent: 3mA max 8-PIN and SOL-16 two packages (our shop uses SOL-16 packaged\nchips) Note:The above features are only used as user selection and are not\nequivalent to module features. Chip application Bridge amplifier Thermocouple\namplifier RTD sensor amplifier Medical equipment data collection\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThe INA114 is a low cost, general purpose instrumentation amplifier offering excellent accuracy. Its versatile 3-op amp design and small size make it ideal for a wide range of applications.\u003c\/li\u003e\n \u003cli\u003eA single external resistor sets any gain from 1 to 10,000. Internal input protection can withstand up to 40V without damage.\u003c\/li\u003e\n \u003cli\u003eThe INA114 is laser trimmed for very low offset voltage (50V), drift (0.25V\/C) and high common-mode rejection (115dB at G = 1000). It operates with power supplies as low as 2.25V, allowing use in battery operated and single 5V supply systems. Quiescent current is 3mA maximum.\u003c\/li\u003e\n \u003cli\u003eThe INA114 is available in 8-pin plastic and SOL-16 surface-mount packages. Both are specified for the 40C to +85C temperature range.\u003c\/li\u003e\n \u003cli\u003eApplication: Bridge amplifier; Thermocouple amplifier; RTD sensor amplifier; Medical equipment data collection\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2020-12-02T17:55:46+11:00","created_at":"2020-12-02T17:55:46+11:00","vendor":"Taidacent","type":"Power Amplifiers","tags":["m02"],"price":18600,"price_min":18600,"price_max":18600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37369418186905,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07CXXRHY9","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taidacent INA114 Instrumentation Amplifier 1000x Gain Adjustable Single-Supply Operation Single-Ended\/Differential Input","public_title":null,"options":["Default Title"],"price":18600,"weight":10,"compare_at_price":null,"inventory_management":null,"barcode":"6440267897113","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/soundstores.net\/cdn\/shop\/products\/B07CXXRHY9.jpg?v=1650330960"],"featured_image":"\/\/soundstores.net\/cdn\/shop\/products\/B07CXXRHY9.jpg?v=1650330960","options":["Title"],"media":[{"alt":"[AUSTRALIA] - Taidacent INA114 Instrumentation Amplifier 1000x Gain Adjustable Single-Supply Operation Single-Ended\/Differential Input ","id":26754956394649,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/soundstores.net\/cdn\/shop\/products\/B07CXXRHY9.jpg?v=1650330960"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/soundstores.net\/cdn\/shop\/products\/B07CXXRHY9.jpg?v=1650330960","width":1001}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eTaidacent INA114 Instrumentation Amplifier 1000x Gain Adjustable Single-Supply Operation Single-Ended\/Differential Input\u003c\/h4\u003e\n\u003cp id=\"b\"\u003eOview The module is exquisite and compact, and has\nexcellent amplification performance. The amplification of small signals can be\ngreater than 1000 times, the detection of weak signals is good, the single\npower supply is very convenient, and the onboard 5V fixed output voltage.\nParameter Module name INA114 instrument program-controlled amplifier Module\npower supply 6V-24V can be used, but it depends on the voltage output of the\nmodule Module size 50mm X 50mm Module bandwidth INA114 is lower than 100KHz\nunder high gain Module input signal type single-ended signal or differential\nsignal Maximum module magnification greater than 2000 times (measured), due to\nthe large gain, the waveform has large fluctuations in the band. It is\nrecommended to use multi-stage amplification for high gain Fixed output\nvoltage 5V-10V (default delivery 5V) Pin description Feature INA114 is a low-\ncost, high-precision instrumentation amplifier that only needs an external\nresistor to set the gain, and the gain range is 1 to 10000. This module can be\nmagnified 1000 times, the circuit layout is regular, MINI, the design layout\nis reasonable, the materials are generous, and it is suitable for project\ndevelopment and student competitions. Module chip INA1 14 is a low-cost,\ngeneral-purpose instrumentation amplifier that provides excellent accuracy.\nIts multifunctional 3-op amplifier design and small size make it an ideal\nchoice for a wide range of applications. An external resistor can set any gain\nfrom 1 to 1000. The internal input protection can withstand up to ±40V without\ndamage. The laser processed INA1 14 has extremely low offset voltage (504V),\nextremely low drift (0.25μV\/°C) and high common mode rejection (115dB when G =\n1000). It can be powered by a minimum of ±2.25V, and can be powered by battery\nand 5V single power supply. The minimum quiescent current is 3mA. INA1 14\nadopts 8-pin plastic and SOL-16 surface mount package. Both have the\ncharacteristics of a temperature range of -40°C to 85C. Chip characteristics\nLow offset voltage: 50 uV max Low drift: 0.25μV1°C max Low input bias current:\n2nA max High common mode rejection: 115dB minimum Input overvoltage\nprotection: ±40V Wide power supply voltage range: +2.25V~+18V Low quiescent\ncurrent: 3mA max 8-PIN and SOL-16 two packages (our shop uses SOL-16 packaged\nchips) Note:The above features are only used as user selection and are not\nequivalent to module features. Chip application Bridge amplifier Thermocouple\namplifier RTD sensor amplifier Medical equipment data collection\u003c\/p\u003e \n\n\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThe INA114 is a low cost, general purpose instrumentation amplifier offering excellent accuracy. Its versatile 3-op amp design and small size make it ideal for a wide range of applications.\u003c\/li\u003e\n \u003cli\u003eA single external resistor sets any gain from 1 to 10,000. Internal input protection can withstand up to 40V without damage.\u003c\/li\u003e\n \u003cli\u003eThe INA114 is laser trimmed for very low offset voltage (50V), drift (0.25V\/C) and high common-mode rejection (115dB at G = 1000). It operates with power supplies as low as 2.25V, allowing use in battery operated and single 5V supply systems. Quiescent current is 3mA maximum.\u003c\/li\u003e\n \u003cli\u003eThe INA114 is available in 8-pin plastic and SOL-16 surface-mount packages. Both are specified for the 40C to +85C temperature range.\u003c\/li\u003e\n \u003cli\u003eApplication: Bridge amplifier; Thermocouple amplifier; RTD sensor amplifier; Medical equipment data collection\u003c\/li\u003e\n \u003c\/ul\u003e"}
![[AUSTRALIA] - Taidacent INA114 Instrumentation Amplifier 1000x Gain Adjustable Single-Supply Operation Single-Ended/Differential Input](http://soundstores.net/cdn/shop/products/B07CXXRHY9_1024x.jpg?v=1650330960)
Taidacent INA114 Instrumentation Amplifier 1000x Gain Adjustable Single-Supply Operation Single-Ended/Differential Input
$186.00 AUD
Taidacent INA114 Instrumentation Amplifier 1000x Gain Adjustable Single-Supply Operation Single-Ended/Differential Input Oview The module is exquisite and compact, and has excellent amplification performance. The amplification of small signals can be greater than 1000 times, the detection of weak signals is good, the single power supply is very ...
