USB Audio Interface with Mic Preamplifier XRL audio interface 48v 2 channel for streaming Support Instrument Guitar or Bass Smartphone Tablet Computer and Other Equipment Recording
USB Audio Interface with Mic Preamplifier XRL audio interface 48v 2 channel for streaming Support Instrument Guitar or Bass Smartphone Tablet Computer and Other Equipment Recording
USB Audio interface The hardware interface provides the means for connecting a microphone and an instrument or line level audio signal to a computer running Mac OS or Windows. The signals at the physical inputs can be routed to your audio recording software / digital audio workstation In addition to the XLR mic input, provides a single 1/4" input with an instrument/line switch that allows it to accept signal from a guitar, bass, synthesizer, or drum machine. 24-bit / 192 kHz converters ensure that signals are captured and reproduced with detail and clarity. Listen through headphones or connect active speakers to the balanced 1/4" monitor outputs. Since is powered via USB-Type C, you can take it anywhere your Mac or Windows computer can go. Features 1.Input 1 – electronically balanced input via 3-pin XLR socket for microphone. 2.48V LED - illuminates when turn on the 48V touch switch. (48V - phantom power switch for mic input - enables 48 V phantom power at the XLR socket.) 3.INST LED – illuminates when turn on the INST touch switch. (INST - Instrument/Line level switch for Input 2–switches gain to suit instrument or line level signals.‘INST’illuminates blue when Instrument mode is selected.) 4.MONITOR LED - illuminates when turn on the MONITOR touch switch. (MONITOR – selects monitoring of input signals (mixed with the DAW output)to be directly from inputs (ON) or via the DAW (OFF).) 5.USB LED – illuminates when the unit receives USB bus power and is confirmed by the computer as connected and operating correctly. 6.GAIN 1 – adjust the gain for the microphone signal at Input 1. The gain controls have concentric tri-colour LED ‘rings’ to confirm signal level: Green light indicates low input level, blue light ring indicates medium input level, red light ring indicates high input level. 7.Input 2 – ¼” TRS jack socket for connecting instruments (unbalanced) or line level (bal
- USB Audio interface: high-performance converters enable allowing you to record, mix and play back audio in studio quality at up to 24-bit/ 192kHz, give your recordings clarity and distinction,
- Guitar audio interface: support plug a guitar or bass its high headroom will let you record without distortion or clipping. Both of inputs have Gain Halo meters, which makes it easy to set input levels.
- XLR audio interface with phantom power Mic preamplifier inputs are on the front panel: Input 1 uses a standard 3-pin XLR socket,and is configured to work with microphones of most types; you will probably have a male XLR connector on the end of your mic cable.
- Mic audio interface Both of inputs have Gain Halo meters, which makes it easy to set input levels. And also has balanced outputs, which means when you connect them to monitors or an amplifier with balanced inputs, your audio will be protected from any hum or interference.
- Computer recording audio interfaces supports free warranty. If you have any questions, please contact the seller's customer service