Wireless Microphone Headset, UHF Wireless Headset Mic System, 160ft Range,1/8''&1/4'' Plug, for Speakers, Voice Amplifier, PA System-Not Supported Phone, Laptop
Wireless Microphone Headset, UHF Wireless Headset Mic System, 160ft Range,1/8''&1/4'' Plug, for Speakers, Voice Amplifier, PA System-Not Supported Phone, Laptop
Thank you very much for choosing Maomaoyu. Before each of our products leaves the factory, we have carried out three strict tests on each product. First plug in the voice amplifier test, then plug in the high-power speaker test, and finally put it in the portable PA system test. The pairing is successful and the effect is perfect before the product is packaged and shipped. How to use 1, first fully charge the transmitter and receiver. 2. Insert the receiver into the voice amplifier and turn on the receiver switch. At this time, the blue light of the receiver flashes. 3. Press and hold the transmitter switch for three seconds until the blue lights of the transmitter and receiver stop flashing. The pairing is successful at this time. 4. After the pairing is successful, the sound is very small. You have to press the sound + key, and the sound gradually increases from 1 to 9. Multiple devices are used simultaneously, How to prevent cross frequency? First of all, you should be understood that the LED lights display 001 to 009 for volume, and C00 to C49 for frequency. 1. First, long press the power button for 3 seconds to turn on the headset transmitter, 2. Press "+" and "—" for 3 seconds at the same time. Enter the frequency selection state. 3. Turn on the receiver. 4. The transmitter display light will flash for a few seconds and C00 will appear. This is a frequency. You can change it to C01, C02...C49 so that each set of microphones is set to a different frequency band. There will be no string frequency. Note that when each microphone sets the frequency band, the other microphone should be turned off. After setting up one, turn off and then the next one. ---Not Support Android & IOS phone,Macbook,laptop ---Not support bluetooth speaker ---Not support Aux or digital audio system
- Latest Upgraded Wireless Microphone Headset System: Adopt advanced UHF wireless transmission technology. 160 ft (50M) stable wireless connection at open areas. Suitable for teaching, stage performers, Meeting etc.Do not support mobile phone/ Mac/laptop. Only for Mic Jack, not Aux Jack, otherwise no Sound.
- [How to use] 1. First, fully charge the transmitter and receiver. 2. Insert the receiver into the voice amplifier and turn on the receiver switch. At this time, the blue light of the receiver flashes. 3. Press and hold the transmitter switch for three seconds until the blue lights of the transmitter and receiver stop flashing. The pairing is successful at this time. 4The sound is very small at this time. You have to press the sound + key, and the sound gradually increases from 1 to 9.
- CHARGE AND WORK OF WIRELESS MICROPHONES: The Transmitter and Receiver are built-in 400 mAh rechargeable lithium-ion batteries that can offer about 6 hours working time. USB cable has two Micro USB v2.0 for charge for the transmitter and receiver at the same time, fully charge is only 2.5 hours.Perfect Application: The plug on the receiver is 3.5mm. For 6.35mm amplifiers,please use the additional 6.35mm adapter(included)to connect more equipments.
- Wide Compatibility: UHF wireless microphone can be used with voice amplifier/portable pa system/mixer/large power speakers/karaoke microphone speaker system. We also provide 3.5mm to 6.35mm adapter, which helps you can have more choices.
- WHAT IF I CAN'T PAIR OR NOT SOUND: 1.Turn off the receiver and transmitter, 2.Turn on the transmitter(Handheld microphone), blue light is on, long press + to blue light flash 3.Turn on the receiver and wait for the connection 4.The blue lights of the transmitter and receiver stop flashing, the connection is successful.We offers 1-year warranty and free replacement service, If you have any question, please contact us first.we can help you connect..