WS2812B LED Strip,3.3ft Full-Color LED Strip Lights Individually Addressable,5050 RGB SMD 144 Pixels Dream Color Waterproof IP67 White PCB 5V DC for Home Bedroom Bar Decor Lighting
WS2812B LED Strip,3.3ft Full-Color LED Strip Lights Individually Addressable,5050 RGB SMD 144 Pixels Dream Color Waterproof IP67 White PCB 5V DC for Home Bedroom Bar Decor Lighting
☞Parameter: Voltage: DC5V FPCB color: White Life span:≥50000hrs Item Weight :8.8ounces Light source: SMD 5050 Power: 45W (0.3W/LED) LED Quantity :144LED/M Working power: 36W/Roll Item:WS2812B LED Strip Light Emitting Color:Full colour(24-bit) Protection Rate: Waterproof IP67 Working Temperature: -20 ~ +40°C Wave length(NM):R,650nm ; G,520nm ; B,460nm Instruction: Red wire: 5V+ ; Black Wire: GDN ; Green wire: Data☞☞Kindly note:1) You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip.2) The LED strip comes with 3-pin JST SM connector on each end and separated power/ground wires, which makes it easy to wire up for power. These strips are sold by the meter!3) There is a joint point in the middle of the strip and the LEDs are not perfectly spaced at that point. It's just a tradeoff with the ability of the flex PCB maker and density. In fact, most if not all of the LED strips are manufactured in half-meter lengths.☞☞☞Package included:1x 3.28ft WS2812B LED strip light
- HIGHER DENSITY BUT THINNER LED STRIPThere are 144LEDs/meter , But this WS2812B LED strip is only 12.5 mm wide, 10 mm if you remove the strip from weatherproof sheathing.
- FULL COLORFUL & COME W/ WEATHERPROOF TUBE256 brightness display and full 24-bit color display. You can control each LED Pixel individually and set it to any color or animation you want. Weatherproof silicone tube protects LED strip very well and makes it easy to clean.
- CUTTABLE&CONNECTABLEWS2812B strip is made of flexible PCB material, can cut it pretty easily with wire cutters, there are cut-lines every 0.65"/1.7cm (1 LED each). Solder to the 0.1" copper pads and you're good to go. Of course, each real WS2812B LED strip can be connected end to end by 3-pin JST connector easily, Maxim base on you controller.
- INDIVIDUALLY ADDRESSABLEYou can control each LED individually! Yes, that's right; this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). WS2812B Led strips are work great with FastLED library
- HOW TO GET IT WORKFirst, you will need an output is 5V power supply( Not include). Second, Connect Power and Ground from Power Supply and Connect Ground and Control (data) wire to mini controller or whatever you are driving the string with ESP8266 or any controller