12V-24V Step-Down DC Adapter Cable DMW-AC8 + DCC8 DC Coupler DMW-BLC12 BLC12E Dummy Battery for Lumix GX8 FZ1000 FZ200 G7 G6 G5 GH2 GH2K GH2S DMW-DCC8
12V-24V Step-Down DC Adapter Cable DMW-AC8 + DCC8 DC Coupler DMW-BLC12 BLC12E Dummy Battery for Lumix GX8 FZ1000 FZ200 G7 G6 G5 GH2 GH2K GH2S
Color:DMW-DCC8 AC adapter not included！ 12V 2A Power Adapter (Https:// Voltage DC Cable DC Input : 12V-24V, current 2A or more. DC output: 8.4V / 8.8V DC step- down cable length: 60cm Compatible with: Our power supply kit is fully compatible with the following Lumix camera models: DMC-FZ1000, DMCFZ1000 DMC- FZ200, DMCFZ200, FZ200 DMC-FZ300, DMCFZ300 DMC-G7, DMCG7 DMC-G6, DMCG6, G6 DMC-G5, DMCG5, G5 DMC-GH2, DMCGH2, GH2 DMC-GH2K DMCGH2K, GH2K DMC-GH2S, DMCGH2S, GH2S DMC-GX8, DMCGX8, GX8 DMC-G81, G81 DMC-G80, G80 DMC-G85, G85 and more models. Package include: 1 x Step-down DC Adapter Calbe 1 x DC Coupler DMW-DCC8 DummyBattery1 x Free cable (male to male) (DC drive cable, Customized production, Strict inspection,High quality chip,Efficient conversion rate.) Compare the dc step-down cable with the USB step-up cable: (1) The dc step- down cable can easily find an external power supply that meets the requirements and can provide a more adequate instantaneous power requirement for the camera shutter. (2) The USB step-up cable has high requirements for the mobile power of the USB power interface, which involves the supply voltage, the quality of the internal battery cells, and the discharge switch current of the board chip. Tips: General digital battery printed above parameters 7.2V / 7.4V labeled battery, it is the camera's minimum operating voltage, these batteries need to use 8.4V charger, full of power, charger 8.4V said no-load voltage, operating voltage and no-load voltage are two different concepts. External power used in the camera, You need to have enough power to supply, the camera is a load,the operating voltage is far lower than the no- load voltage.Therefore, the Camera adapter's no-load voltage is usually between 8V-9V (Note: the multimeter test is no-load voltage).
- Step-down cable:Input DC Female plug size is: 5.5mm2.1mm/2.5mm,Please note the size of the output plug of the external power adapter: 5.5mm2.1mm/2.5mm Male, Support most of the power adapter that output voltage is 12V to 24V, current 1.5A or above.
- In order to avoid the interface between the dummy battery and the USB cable, long-term multiple insertions and removals result in wear and poor contact. After removing the dummy battery from the camera, it is recommended that you do not separate the connection between the dummy battery and the USB cable.
- Some cameras require that the lid of the camera's battery compartment must be closed, After closing the lid, the camera can be turned on, For details, see the Manual illustration.
- Easily use your own 12V-24V power adapter. dc step-down cable is suitable for 12V-24V power adapters for some printers, surveillance cameras, car chargers, routers, monitors, etc.
- If you have any problem during using our product,you are welcome to contact us for further assistance. We will do our best to assist you and making you 100% satisfaction.