Arkare Addressable LED Strip WS2812B RGB Programmable Digital LED Pixels 16.4ft 150 LEDs Dream Color Rainbow LED Tape Light 5V DC White PCB, Support Arduino Raspberry Pi, No Power/Controller
Arkare Addressable LED Strip WS2812B RGB Programmable Digital LED Pixels 16.4ft 150 LEDs Dream Color Rainbow LED Tape Light 5V DC White PCB, Support Arduino Raspberry Pi, No Power/Controller
IC type: WS2812B Light source: 5050 RGB LED LED Qty: 30 LEDs per meter, 150 LEDs per roll 1 integrated RGB LEDs per segment, individually controllable R G B order: G/R/B; NOT R/G/B Wave length (NM): R,620~625nm ; G,515~525nm; B,465~475nm The gray level: 256 Color: 24-bit full color Beam angle:120° Voltage: DC 5V Max Current: 1.8A per meter, 9A per roll Max Power: 9W per meter, 45W per roll Protection level: Not waterproof, no weatherproof casing Dimension: 10mm (0.39") wide, 2mm (0.08") thick, 33.3mm (1.3") long per segment, 5000mm (196.85”) long per roll. Connector: 3 pin JST SM PCB color: White Life span:≥50000hrs Working environment: -20℃to +50℃ Red wire~5V+; Black Wire~GDN; Green wire~Data Reverse polarity protection Hot swap protection Kindly Note 1. Only 1x WS2812B LED strip in the package. To let it work, you need buy 5V power supply and WS2812B controller, which is not included. 2. You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip. 3. If you set the whole roll of LED strip on full white, it will get orange/ red gradually. This is not quality issue but voltage drop. To solve this issue, you need to inject 5V power on both ends of the LED strip. 4. The strips are made of flexible PCB. You can gently bend it to an arc. But please NEVER rudely bend it to right or acute angle, otherwise the circuit board will crack. Package 1x 16.4ft WS2812B led strip 1x 3PIN JST connector Power supply and controller are not included Non-Waterproof IP20 WS2812B LED Strip Addressable RGB 144 LEDs White Waterproof IP67 WS2812B LED Strip Addressable RGB 150 LEDs Black Waterproof IP67 WS2812B LED Strip Addressable RGB 144 LEDs Black Non- Waterproof IP20 WS2812B LED Strip Addressable RGB 150 LEDs Black Non- Waterproof IP20 WS2812B LED Strip Addressable RGB 300 LEDs White Waterproof IP67 Waterproof level IP20 IP67 IP67 IP20 IP20 IP67 PCB Color White White Black Black Black White Input Voltage DV5V DV5V DV5V DV5V DV5V DV5V LED Quantity 144 144 150 144 150 300
- Individually addressable LEDs >>This is digitally-addressable LED strip. There are 30 RGB LEDs per meter. You can set the color of each LED's red, green, blue component and their brightness individually! 256-level brightness and 24-bit color display, achieve 16777216 colors full color display.
- Support many controllers >> It can be programmed by Arduino, Raspberry Pi, Fadecandy and T1000S, K1000C controllers. It can also be controlled by SP103E SP105E SP108E SP110E pre-programmed controllers, SP106E SP107E music controllers and SP501E smart WiFi controllers.
- Easily cut and connect >> It comes with 3pin JST-SM connectors and separate power/ground wires on both ends. You can hook up multiple strips together to make it longer and inject power in case of voltage drops. Each LED can be cut and soldered easily along the cut-line to get different length.
- Flexible and Self-adhesive Design >> It is made of flexible PCB. You can gently bend it to an arc.But NEVER rudely bend it to right or acute angle, otherwise the circuit board will crack. It comes with self-adhesive 3M tape on back, so you can mount it on dry and flat surface easily.
- Wide Application >> It can be used to make led screen, led wall, advertising board and widely applied to hotel, KTV, bars, wedding party lighting, home and car decoration, city skyline, building outline and so on. To let it work, you need power supply and controller, which is not included in the package.