KINGLUX 2400K Led Strips, IP62 Warm White 2400K Super Bright DC12V 25W SMD3528 300LEDs, IP62 Led Tape Lights 2400K 5Meter/ 16.4Feet Using for Homes, Kitchen Cabinet Lights and ceilling Lights
KINGLUX 2400K Led Strips, IP62 Warm White 2400K Super Bright DC12V 25W SMD3528 300LEDs, IP62 Led Tape Lights 2400K 5Meter/ 16.4Feet Using for Homes, Kitchen Cabinet Lights and ceilling Lights
1,Dimmable: Can be dimmer and match with most of the dimmer at the market. 2,IP62: Use 100% siligon gel on the led chips surface with easy waterproof and can be used at humidity place. 3,Safety: DC12V low volts very safety for human beings to use it. 4,Lifetime: Use 100% copper PCB with good heat dissipation,100% gold wires inside of the led chips.So long lifetime can reach 45000 hours. 5,DIY: With 3M tape at the back of the strips,Easy to fixed it well at the Place where to using.also can be cut by each 3 leds.Amazing DIY lighting. 6,Low power consumption: Only 25 watts per spool with high lumen output in 2075 lumen at least,Can reaplce the 100W-150W Halogen lamps. 7,Others: CRI more than 85 can show the true color of something and led chips comfortable for the human beings eyes. Key Parameter - Strip length: 5 meters (16.4ft ) Size: W0.4H0.2 inches- Light color: Gold color 2400K- Lumens: 2075Lumen/Reel, 415Lumen/Meter- DIY: Can be cut by each 3leds,3M tape for easy fixation.- Working Voltage: DC 12V - Power consumption: 5W/meter,25W/reel- Level : IP62 can be used at the humidity place.- Lifetime: 45,000+ hours-Dimmable: Fully dimmable(Need the dimmer controller) Read more Home improvment lights For bedroom night lights 1:With 3M tape can be fixed under bed very strong. Use the Sensor can controll the Light on and off very easy. also can use the dimmer to control the brightness. 2: Low volts very safety for Human beings to touch it,No any dangerous. 3: Can be cut by each 3 leds,Easy to do the DIY lighting by the requirements. 4:IP62 easy waterproof and dusty free ,100% Silicon gel on the led surface can protect the lights very well also dustproof. For Stairs night lights 1:With 3M tape can be fixed under bed very strong. Use the Sensor can controll the Light on and off very easy. also can use the dimmer to control the brightness. 2: Low volts very safety for Human beings to touch it,No any dangerous. Low power consumptions with lower heat dissipations,So very safety to use it. 3: Can be cut by each 3 leds,Easy to do the DIY lighting by the requirements. 4: IP62 easy waterproof and dusty free ,100% Silicon gel on the led surface can protect the lights very well also dustproof. For shower room lights 1:With 3M tape can be fixed under bed very strong. Use the Sensor can controll the Light on and off very easy. also can use the dimmer to control the brightness. 2: Low volts very safety for Human beings to touch it,No any dangerous. Low power consumptions with lower heat dissipations,So very safety to use it. 3: Can be cut by each 3 leds,Easy to do the DIY lighting by the requirements. 4: IP62 easy waterproof and dusty free ,100% Silicon gel on the led surface can protect the lights very well also dustproof. 5: IP62 with the silicon gel on the led surface,Can make the lighting output very soft and comfortable for eyes. Read more Product installation and package Product Features Flexible, easy for installation. It can cut and connect into any length you need.Use double-sided board, good for conduction and radiating.IP62:Dropper series, covered with a layer of silica gel on the surface , dustproofDIY: peel off the 3M tape at the back of the strips then easy to fixed at anywhere you want.Connectors: With two connectors,One can connect the strips and adaptor directly,Another one for DIY connect after you cut the strips. Note:- Power Supply/Control Box/IR Remote Control are Not included, If you need please order separately.- Please do not lighten this item be in roll exceed one minute, in case destroy itPackage included:- 1 x 5 Meter 3528 SMD LED Strip Light Read more How to connect the strips with Power supply or Adaptor 1:You can cut it by each 3 leds,It's easy to find the cut symbol on the strips PCB. at the two ends have the wires,Red and Black.Red is + and black is -. Then you open the connector and put the strips into the connector. Before you put the strips into connector you need peel of the silicon gel on the cut point,Because silicon gel is insulation.Then find the adapter with DC12V output voltage.Then all the strips can light on. 2:If you don't want to cut the strips,Juse use the connector which withour wires and then make the strips with connector together. Red wires is + and Black is -,Then put the two wires into the connectors and with adaptor together,It will be work well. 3:,The strips one roll with 5 meters total 25 watts, one meter is 5 watts,You can cut it by yourself. I suggest the Power supply total power higher 10%-20% than the strips's total power. Then the strips will be long life time and can be loading 100% Read more Factory review We are the manufacture to make the led lights more than 13 years,KINGLUX is a USA lighting Brand more than 10 years at North American.We focus on High quality led lighting products.Hope our Led lights can Green the Earth,Light the world. Read more
- Safe to use. DC12V Super bright purple color SMD 3528 LED strip,each reel need use 25 watts waterproof power supply(the strips not inclue the power supply)
- Total watts: 25 watts/Roll,Length:16.4 ft./5 Meter 300 LED lights per reel, can be cut by each 3leds,easy DIY
- Easy installation. The strip lights come with 3M tape, clips and glue, which can fix the strip well. Every 6 leds can be cut, easy to DIY according to your need.
- 2400K warm white,more comfortable lighting output, Wide angle LED chip:120 Lifespan:50,000 hours
- IP62 easy waterproof,indoor humidity Place Using, 3-year warranty, except for the problem caused by wrong using method