Luvay 6pcs Guitar Bone Bridge Pins + Guitar Bone Bridge Saddle & Nut, Made of Real Bone for Acoustic Guitar
Luvay 6pcs Guitar Bone Bridge Pins + Guitar Bone Bridge Saddle & Nut, Made of Real Bone for Acoustic Guitar
How to replace nut? ①Clean the nut and guitar neck with a knife or tool ②Kick the nut off the neck with a hammer or screwdriver ③Pull the nut out with a tweezer ④Check the nut's thickness, polish the nut if nut is thicker ⑤Put nut in slot, recommended gap is about: LowE= 0.01" (0.25mm), HighE= 0.005" (0.15mm). ⑥Mark the redundant length of nut, and polish them off. How to replace saddle? ①Take the pins, strings, saddle out in order. ②Check the saddle's thickness, polish the saddle if it is thicker ③Make sure that saddle will not fall off when guitar is reversed ④Mark the position on the guitar bridge ⑤Check the saddle height, polish the saddle if it is higher ⑥Make sure the right gap, recommended height of string is about: LowE= 0.125" (3mm), HighE= 0.08" (2mm).
- Package: 1pcs nut + 1pcs saddle + 6pcs pins
- Made of cattle bone,which makes better sound than plastic
- Real bone guitar bridge is prefered by many luthiers and guitar manufacturers. This kind of bone has minimal porosity and a great appearance, which yield good intonation and clarity
- Diameter of of pins' skirt/collar: 0.2"(5.33mm)
- Nut size: 1.7" x 0.24" x 0.3" (43x6x8.5mm), Saddle size: 2.8" x 0.12" x 0.35" (72x3x9mm)