Oiyagai TCRT5000 Infrared Signal Reflective Track Sensor (3.3V-5V),IR Photoelectric Switch Barrier Line Indicator Module for Robot Arm Arduino Smart Car Robotic Kit
Oiyagai TCRT5000 Infrared Signal Reflective Track Sensor (3.3V-5V),IR Photoelectric Switch Barrier Line Indicator Module for Robot Arm Arduino Smart Car Robotic Kit
Introduce: TCRT5000 infrared sensor emits infrared emitting diode continuously when no infrared rays emitted or reflected back is reflected back but the strength is not large enough, the phototransistor has been in the off state, and the output terminal of the module is high, indicating that the diode has been in the off state; in the object to be detected within the detection range, and the intensity of the reflected infrared rays is large enough, phototransistor saturated, and the output terminal of the module is low, the indicator LED is lit. Oiyagai 5pcs TCRT5000 Infrared Reflective Sensor Module IR Barrier Line Track Photoelectric Switch Read more Feature: Using infrared reflective sensor TCRT5000The detection distance: 1mm ~ 8mm apply focal distance of 2.5mmThe comparator output signal clean, good waveform, driving ability, more than 15mA.With a multi-turn precision potentiometer adjustable sensitivity adjustmentThe working voltage of 3.3V-5VThe output format: digital switching outputs (0 and 1)A fixed bolt holes for easy installationA small PCB board size: 3.2cm x 1.4cmUsing a wide voltage LM393 comparator Read more Uses: Meter pulse data samplingFax paper shredders detectionObstacle detectionBlack and white line detection Read more Package included: 100% Brand New5 x IR Barrier Line Track Sensor Read more How to Wiring: VCC: Connect the positive pole of the power supply (3-5V);GND: Connect the negative pole of the power supply;DO: TTL switch signal output;AO: analog signal output
- Using infrared reflective sensor TCRT5000.
- Detection of reflection distance: 1 mm to 25 mm.
- The comparator output signal clean, good waveform, driving ability, more than 15mA.
- With a multi-turn precision potentiometer adjustable sensitivity adjustment.
- Parameter: Working voltage:3.3V-5V, Detecting reflection distance:fit for 1mm-25mm, Dimemsion:1.5 x 0.55 x 0.7(L*W*H)/3.8cmx1.4cmx1.8cm(L*W*H)
Related Products
Optical Infrared Four Point Wate...
Optical Infrared Four Point Water Liquid Oil Fuel Fluid Level Sensor Controller High Sensibility-Use to Detect Liquid Level(Pack of 3)
$132.00 AUD
Optical Infrared Four Point Water Liquid Oil Fuel Fluid Level Sensor Controller High Sensibility-Use to Detect Liquid Level(Pack of 3) Four Point Optical water level sensor can be used to replace mechanical type float switch with better level control accuracy and durability. Main Feature : - Compact in construction - No mechanical moving parts, ...
uxcell Stainless Steel Float Swi...
uxcell Stainless Steel Float Switch for Water Pump Tank swim pool garden pond Liquid Water Level Sensor M11 90mm Length 2Pcs
$118.00 AUD
uxcell Stainless Steel Float Switch for Water Pump Tank swim pool garden pond Liquid Water Level Sensor M11 90mm Length 2Pcs Read more Float Ball Switch Liquid Water Level Sensor Floating ball switch is a kind of liquid level control device with simple structure and convenient use. It has the advantages of small volume and long working life comp...
Gems Sensors 01702 Buna N Float...
Gems Sensors 01702 Buna N Float Single Point Rugged Compact Alloy Level Switch with 316 Stainless Steel Stem and Mounting, 1" Diameter, 1/8" NPT Male, 9/16" Actuation Level, Normally Open
$318.00 AUD
Gems Sensors 01702 Buna N Float Single Point Rugged Compact Alloy Level Switch with 316 Stainless Steel Stem and Mounting, 1" Diameter, 1/8" NPT Male, 9/16" Actuation Level, Normally Open Rugged durability Broad heat and pressure capabilities Ideal for shallow tanks or restricted spaces, or for low-cost, high vo...
Heschen M18 Capacitive Proximity...
Heschen M18 Capacitive Proximity Sensor Switch Non-Shield Type LJC18A3-B-Z/BX Detector 1-10mm 10-30VDC 200mA NPN normally open(NO) 3 Wires
$103.00 AUD
Heschen M18 Capacitive Proximity Sensor Switch Non-Shield Type LJC18A3-B-Z/BX Detector 1-10mm 10-30VDC 200mA NPN normally open(NO) 3 Wires The LJC18A3 capacitive proximity sensor switch used widely in automatic control industry for detecting, controlling, and noncontact switching. It will send a signal when close to the plastic, glass, metal etc...
Hall Current Sensor Module ACS71...
Hall Current Sensor Module ACS712 Module 30A Hall Current Sensor Module 30A ACS712 Oc127 30
$96.00 AUD
Hall Current Sensor Module ACS712 Module 30A Hall Current Sensor Module 30A ACS712 Oc127 30
MakerHawk Digital Load Cell Weig...
MakerHawk Digital Load Cell Weight Sensor HX711 AD Converter Breakout Module 5KG Portable Electronic Kitchen Scale for Arduino Scale
$113.00 AUD
MakerHawk Digital Load Cell Weight Sensor HX711 AD Converter Breakout Module 5KG Portable Electronic Kitchen Scale for Arduino Scale Features:Two selectable differential input channels.On-chip active low noise PGA with selectable gain of 32, 64 and 128.On-chip power supply regulator for load-cell and ADC analog power supply.On-chip oscillator re...
Intermatic LC4521C 120-Volt Lock...
Intermatic LC4521C 120-Volt Locking Type Thermal Photocontrol
$94.00 AUD
Intermatic LC4521C 120-Volt Locking Type Thermal Photocontrol THERMAL TYPE; 3 INCH DIAMETER X 2-3/4 INCH HEIGHT SIZE; POLYPROPYLENE ENCLOSURE MATERIAL; UL, CSA (CANADA AND US) APPROVAL; OUTDOOR LIGHTING, STREET, PARKING LOT, PEDESTRIAN PATHWAY, AND LANDSCAPE LIGHTING APPLICATION; 120 VOLT AC VOLTAGE RATING From the Manufacturer The LC4500 Series...
HX711 Digital Load Cell Weight S...
HX711 Digital Load Cell Weight Sensor AD Converter Breakout Module +5KG Portable Electronic Kitchen Scale Module for Arduino Scale
$113.00 AUD
HX711 Digital Load Cell Weight Sensor AD Converter Breakout Module +5KG Portable Electronic Kitchen Scale Module for Arduino Scale Note: if you use your own development board connect the test is not data, Please check the sensor signal line is occupied by other sensors on the development board. if yes you change the IO port connection will be OK...
CenryKay 10PCS IR Infrared Obsta...
CenryKay 10PCS IR Infrared Obstacle Avoidance Sensor Module Reflective Photoelectric Sensor Module Compatible with Arduino Smart Car Robot DIY Kit
$99.00 AUD
CenryKay 10PCS IR Infrared Obstacle Avoidance Sensor Module Reflective Photoelectric Sensor Module Compatible with Arduino Smart Car Robot DIY Kit Feature: 1, When the module detects an obstacle in front of the signal, the green indicator lights on the board level, while the OUT port sustained low signal output, the module detects the distance 2...
【500Hz Electronic Compass+Tilt S...
【500Hz Electronic Compass+Tilt Sensor】WT931 High-Performance Acceleration+Gyro+Angle +Magnetometer with Kalman Filtering, MPU9250 Vibration IMU with Evaluation Board (IIC/TTL), for Arduino and More
$245.00 AUD
【500Hz Electronic Compass+Tilt Sensor】WT931 High-Performance Acceleration+Gyro+Angle +Magnetometer with Kalman Filtering, MPU9250 Vibration IMU with Evaluation Board (IIC/TTL), for Arduino and More High Performance Rock-solid data output: 3-axis XYZ (Pitch Roll Yaw) Acceleration+ Gyro+ Angle+ Magnetic field+Quaternion, measuremen...
CHENBO(TM)4Pcs 50kg Load Cell Bo...
CHENBO(TM)4Pcs 50kg Load Cell Body Scale Weight Weighting Sensor Half-bridge/Amplifier with 1pcs HX711 A/D Module
$91.00 AUD
CHENBO(TM)4Pcs 50kg Load Cell Body Scale Weight Weighting Sensor Half-bridge/Amplifier with 1pcs HX711 A/D Module Load cell-This load sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales (you know, the ones you use in January for your New Years resolutions, and then forget about a month later)...
DaFuRui 5Pack GY-521 MPU-6050 Mo...
DaFuRui 5Pack GY-521 MPU-6050 Module 6 DOF 3 Axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C Compatible for Arduino
$109.00 AUD
DaFuRui 5Pack GY-521 MPU-6050 Module 6 DOF 3 Axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C Compatible for Arduino Technical specifications: Model: GY-521 Chip: MPU-6050 Pin spacing: about 2.54 mm Supply voltage: 3V-5V Gyroscope range: ± 2000 ° / s Acceleration range: ± 2 ± 4 ± 8 ± 16 g Material:durable metal...
2PCS DC5-30V NJK-5002C 10mm Hall...
2PCS DC5-30V NJK-5002C 10mm Hall Effect Switch Proximity Sensor Inductive Switch NPN NO (Normally Open)
$99.00 AUD
2PCS DC5-30V NJK-5002C 10mm Hall Effect Switch Proximity Sensor Inductive Switch NPN NO (Normally Open) Description: Model: NJK-5002CSupply voltage 5-30VDCDetection distance 10mm (effective detection distance 0-10mm)Load current 150MA (no more than)Output form NPN three linesOutput state normally open (NO)Detect objects metal materialProduct Mat...