RUIZHI XH-W3001 Digital LCD Display Temperature Controller, DC 24V/240W Thermostat Switch with Waterproof Probe Microcomputer Thermostat
RUIZHI XH-W3001 Digital LCD Display Temperature Controller, DC 24V/240W Thermostat Switch with Waterproof Probe Microcomputer Thermostat
Functions: Equipped with 1m waterproof probe, easy to use. ABS flame retardant shell, strong impact resistance. The temperature control range is wide and ranges from -50°C to 110°C. The probe is made of stainless steel, sealed with resin, waterproof and rustproof. It can be installed or embedded directly and quickly into the panel of industrial control devices. Specifications: Main Material: ABS Voltage: 24 V. Output: 10A (max.) Temperature measurement range: -50~110℃. Temperature control precision: 0.1 °C. Load power: 240 W. Measurement input: NTC10K 1m waterproof probe. Installation hole spacing: 7.3 cm / 2.87 inches. Hole diameter: 4 mm / 0.15 inches. Package list: 1 x XH-W3001 temperature controller. Set the starting temperature: Press the up button once to display the start temperature, press and hold the up button for about 3 seconds. The starting temperature number flashes. The desired temperature can be adjusted with the up and down buttons. Set stop temperature: Press the down button once to display the stop temperature, press and hold the button for about 3 seconds to stop the flashing of the temperature number.
Product Features
- Material: The XH-W3001 digital thermostat is made of high quality ABS, flame retardant for high temperature, not easy to change color, high mechanical strength and long service life.
- High precision: temperature control range: -50-110C, control accuracy: 0.1C, input power: DC 24V. Output power: 240W, easy operation, LED display shows the result clearly.
- Waterproof probe: Equipped with 1 metre waterproof NTC10K probe, easy to use, the probe is made of stainless steel, does not rust easily in the water and the temperature of the liquid is controlled, so heating or cooling can be controlled.
- Working mode: two working modes: heating (starting temperature is lower than stop temperature), cooling (starting temperature is higher than stop temperature), with fixed screw holes, easy to install and repair, small size, low power consumption and response.
- Widely used: widely used in incubation areas, HVAC, dehumidifiers, test and test equipment, equipment boxes, air conditioners, temperature monitoring protection, cooling systems for weather station cabinets, etc.